Get matched with top welders in Kingstowne, VA

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: What household tool can cut a metal pipe?

• <div><p>Your typical household tools will not cut a metal pipe. To cut a metal pipe, you&rsquo;d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It&rsquo;s usually safer to let a pro cut a metal pipe, especially if you&rsquo;re not confident in your skills with a heavy-duty saw. </p></div>

Q: Can you cut plexiglass by hand?

• <div><p>Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.). </p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: How much does aluminum welding cost?

• <div><p>The cost to weld aluminum averages about <b>$14 to $22 per pound</b>. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:</p><ul><li><p>Magnesium alloy: $7&ndash;$16 per pound</p></li><li><p>Low-carbon steel: $11&ndash;$12 per pound</p></li><li><p>Stainless steel: $13&ndash;$15 per pound</p></li><li><p>Copper/brass: $24&ndash;$29 per pound</p></li><li><p>Cast iron: $38&ndash;$79 per pound</p></li><li><p>Titanium: $60&ndash;$85 per pound</p></li></ul><p></p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Kingstowne, VA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Kingstowne, VA

*The Angi rating for Welding companies in Kingstowne, VA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Kingstowne, VA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on October 01, 2024

Reviewed in October 2024
There was a mistake in building the rail, but sunlight welding did a fantastic job of fixing the issue and doing right by the customer. Great customer service and a guiding light of how to turn around a situation.
Sunlight Welding LLC
Request a quote
Reviewed in October 2023
Suburban Welding installed rails at my house. The company was prompt, thorough, and price competitive. They did a beautiful job at my house. I would use this company again and recommend it to others, without reservation.
Suburban Welding
Request a quote
Reviewed in November 2021
At some point, we had a snake get into the air warming portion of our woodstove. When we went to start the stove up in the fall, the warmed air smelled terrible and made the whole house smell awful! The job was a pretty big challenge because the whole top of the stove had to be cut off then...
East Coast Welding and Fabricators
Request a quote
Reviewed in September 2017
Chaquero Welding Services promptly responded to my request for a quote with an estimate that compared favorably with two other offers. After I awarded them the contract, they worked with me on the terms, price, and timing for completion of the job. During the project, they gave me periodic...
Charquero Welding Services
Request a quote
Reviewed in November 2014
The work went very well. Robert and Roland Steele provided professional services and were able to creatively apply their expertise utilizing all forms of construction techniques to resolve whatever changing design desire or challenges arose. They were responsive to the customer's concerns and...
Steele Home Improvement Inc
Request a quote
Reviewed in September 2014
<p>Eddie, Lifetime Stones point of contact, visited the job site to determine materials needed and took measurements. Fabricator/welder came with self contained truck that included generator for welding equipment. He removed the old railing and used it as a template for the new railing. The new...
Lifetime Stones & Construction
Request a quote
Reviewed in October 2012
John did a fantastic job in repairing a difficult job requiring carpentry, masonry and welding. I recommend him highly. Joyce Moore <br /> <br />
NOVA MOBILE WELDING SERVICES
Request a quote
Reviewed in June 2012
The spigots were replaced, as well as a length of pipe running from from the spigots. He also replaced our rubber supply hoses with the stainless steel braided ones I had purchased earlier. It took a little bit longer than I thought it would, but that was because of the unexpected welding.
Michael & Son Svc Inc
Request a quote
Reviewed in January 2007
The gate was fixed very quickly by cutting off the bent pipe and then replacing it and painting over the welded site. It looks great and works perfectly now. The workman was polite, professional and very fast. He changed slightly what Mike had originally told me the would do to repair the gate...
OBER & SONS WELDING
Request a quote

Find Welders in Kingstowne

Sunlight Welding LLC

5.0(

)

Serving Kingstowne, VA and surrounding areas

Approved

In business since 2024

Free estimates

Credit card accepted

"There was a mistake in building the rail, but sunlight welding did a fantastic job of fixing the issue and doing right by the customer. Great customer service and a guiding light of how to turn around a situation."

Response time3 hrs

6 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

CLC WELDING SERVICES, LLC

4.9(

)

Serving Kingstowne, VA and surrounding areas

Approved

In business since 2023

Credit card accepted

Offers commercial services

"Very professional. They were in my area and provided same day service. Highly recommend."

+27

Response time50 mins

Recommended by100%of homeowners

Request Quote

Charlie Ornamental LLC

4.7(

)

Serving Kingstowne, VA and surrounding areas

Approved

Super Service Award Winner

In business since 2004

Free estimates

Warranties offered

"I am a developer in the DC area. They do all of my work. They are the most cost-effective and most reliable welding company in the area. The best quality work as well."

+41

Response time2 days

Recommended by85%of homeowners

Request Quote

KK Welding & Erector, LLC

4.5(

)

Serving Kingstowne, VA and surrounding areas

Approved

In business since 2019

Free estimates

Small jobs welcome

"We needed an emergency repair for a road metal drain grate. Traffic on the road had to be stopped while repair was made. KK Welding did the repair on Christmas Day when the business was closed. They were courteous, prompt and reasonably priced. I would recommend them."

Response time12 hrs

Recommended by100%of homeowners

Request Quote

Eagle Welding Services, Inc.

5.0(

)

Serving Kingstowne, VA and surrounding areas

Approved

In business since 2012

Free estimates

Credit card accepted

We have several years of experience and with our expert customer service, you can rest assured that all of your welding needs will be taken care of right away. Give us a call to set up your free estimate now.

Response time5 days

Recommended by100%of homeowners

Serving Kingstowne, VA and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Credit card accepted

"I was completely satisfied with the work done. They came out the same day I contacted them and carefully and completely finished the work. I would highly recommend Jose and his team."

Response time4 hrs

Response rate93%

3 neighbors recently requested a quote

Serving Kingstowne, VA and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"5 Star Welding employee was very friendly and understanding of my request to install a handicap rail on both sides of the steps. The rail design looked better than I expected. Professional job! My 2-year-old grandson was able to pull himself up the steps with the handle provided on the first level. We were all so impressed with his workmanship."

+14

Response time1 day

Recommended by92%of homeowners

Serving Kingstowne, VA and surrounding areas

In business since 2022

Free estimates

"It was a great experience"

Response time11 hrs

Recommended by100%of homeowners

Request Quote

Vulcan Ironwork & Mobile Welding Co

4.4(

)

Serving Kingstowne, VA and surrounding areas

In business since 2017

Free estimates

"Javid was very responsive and the work was done the next day (had hand rail posts welded). He welded it with no bump showing - smooth as silk! Awesome."

Response time2 days

Recommended by100%of homeowners

Serving Kingstowne, VA and surrounding areas

In business since 2005

Free estimates

Credit card accepted

"John handled our aluminum fence install without delay. He walked the line with us first, made sure the layout matched what we wanted, and started right away. The panels went in clean, no gaps or uneven spots. He stayed on task and worked through until it was done. No talking in circles, no delays. The fence looks tight and secure. Glad we picked this crew."

+33

Recommended by94%of homeowners

Request Quote

Showing 1-10 of 46

Welding questions, answered by experts

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:

Magnesium alloy: $7–$16 per pound
Low-carbon steel: $11–$12 per pound
Stainless steel: $13–$15 per pound
Copper/brass: $24–$29 per pound
Cast iron: $38–$79 per pound
Titanium: $60–$85 per pound

The Kingstowne, VA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Sara Coleman
•
Apr 6, 2026Apr 6, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.