Top-rated ceramic tile pros.

Get matched with top ceramic tile pros in Cleveland, VA

Enter your zip and get matched with up to 5 pros

Need a pro for your ceramic tile service project in Cleveland, VA?

Select your specific project to find the pro for you.

Find Ceramic tile pros in Cleveland

Avatar for Welcome Home Builders LLC
Welcome Home Builders LLC
5.0(
4
)
Tile: Ceramic and Porcelain - RepairTile: Ceramic and Porcelain - Repair- For Business

Serving Cleveland, VA and surrounding areas

Approved

In business since 2025

Free estimates

Small jobs welcome

"Jed with Welcome Home Builders did a good job helping us with the project at our church. He built a wall to divide a large room up for us to make a new space. Then the sheet rock, mud, and paint for the new wall all turned out well. Thankful for the help and work he provided to our church. It is much appreciated."
Recent project
Deck remodel
Deck remodel
Deck remodel
Deck remodel

+12

2 neighbors recently requested a quote
Avatar for Townside Building and Repair INC
Townside Building and Repair INC
4.2(
13
)
Tile: Ceramic and Porcelain - InstallTile: Ceramic and Porcelain - Install - For BusinessTile: Ceramic and Porcelain - Repair+1 more

Serving Cleveland, VA and surrounding areas

In business since 1997

Free estimates

"Steve was very punctual, showing up early every day. The work didn't exceed the estimate, and he was very good about explaining any needed changes as they came up. His knowledge of construction standards was very helpful and one of the main reasons we chose Townside. The projects listed were not done in a single contract, but over three seperate visits. The fit and finish of all of the projects are second to none. We will definitely use Townside in the future.
"
basemet
Additional Photos
exterior deck, fairfax va.
bathroom renovation
basement finish

+9

Recommended by85%of homeowners
Showing 1-10 of 32
Ceramic Tile questions, answered by experts

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

Tile shouldn’t be set tight against the tub. Bathtubs can expand when filled, and they can shift slightly with the weight of occupants. For this reason, it’s important to leave a slight gap between the bathtub and the first row of tile. Aim for a narrow gap of approximately 1/16 of an inch, filled with caulk, to allow for this expansion and movement while still allowing for tile shower waterproofing.

Add a T-shaped spacer to each corner of a tile when placing it. You’ll want to nudge the tiles closer together so the spacers are touching each corner. When you’re done installing your tile, you can remove each spacer, wash them, and use them for your next project.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

No, you don’t need to remove the old grout before installing new tile over existing tile. In fact, the old grout helps fill in gaps between tiles, creating a more even surface for the new layer. However, it's important to ensure that the grout is clean, solid, and free of cracks or crumbling areas. Damaged grout should be repaired or replaced before proceeding. Cleaning the surface thoroughly and filling any low spots will help the new adhesive bond properly and ensure a smooth, stable installation.

The Cleveland, VA homeowners’ guide to ceramic tile services

From average costs to expert advice, get all the answers you need to get your job done.