Get matched with top pressure washers in Taylor, UT

You can get more pressure out of your pressure washer by adjusting the pressure control knob clockwise to increase pressure (+). You can also check your nozzle for debris and clogs and remove anything you find with needle nose pliers. Switch to a nozzle with a lower-degree spray angle or a turbo nozzle to achieve more pressure at the tip. Check for leaks in the hose and connections, and make sure your water supply is offering enough pressure. 

If you’ve looked at power washing before and after photos, you might be wondering if this option isn’t the better cleaning solution for a wood fence. In fact, it just might be, especially if you’re struggling with issues like mold or embedded dirt. Keep in mind that the only difference between these two methods is that power washing uses hot water and pressure washing doesn’t, but sometimes such a small distinction can have a huge impact.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

It usually takes about two to four hours to pressure wash a 2,000-square-foot home. The exact time depends on how much dirt there is, the type of siding, and whether you’re doing it yourself or hiring a professional pressure washing service. A DIY job can take an average of six to eight hours, but you should plan for it to take an entire day. A pro can get the job done quicker.