Yes, professionals can match existing finishes and exteriors by using specific materials to ensure a seamless repair that integrates with the rest of the piece or set.
When water penetrates wood, the wood swells, causing the wood and veneer to separate. This separation creates bubbles on the surface of your furniture. If water spills on wood veneer, it needs to be dried ASAP. Surface spills can cause minor damages like white spots and blushing, but if you’re slow to action, you’re looking at more work—and spending—to restore your wood veneer.
Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.
For minor issues:
Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.
Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.
For more significant damage:
Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.
Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.
After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.
Use appropriate thickness materials—3/4-inch sides for heavy loads, proper joinery techniques, and quality hardware rated for your intended weight. Avoid overloading drawers beyond their design capacity, and periodically check and tighten any loose fasteners.
Regularly check and tighten bolts, avoid overloading, and inspect for wear.
The Ferron, UT homeowners’ guide to chimney repairs
From average costs to expert advice, get all the answers you need to get your job done.
Notice leaks and corrosion around your chimney? You might need new flashing or some careful repairs. Here are some common chimney flashing repair costs.
