These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.

On average, a garbage disposal can last anywhere from 7 to 12 years, with many models functioning well for about 10 years. With heavy usage, a motor may last a minimum of five years, while grinding plates will wear down over time. It's generally a good idea to consider a replacement if your unit is approaching the 10-year mark. Other signs that it's time for a new disposal include frequent leaks, persistent clogs, lingering odors, lack of power, or unusual noises. If your unit is not that old, it's worth investigating if a less expensive part, like a rubber seal or a loose hose, is causing the issue.