Get matched with top locksmiths in Sunray, TX

It could be difficult to get in and out of a lock for several reasons, such as the keyhole needing additional lubrication. Particles, debris, and dirt can also get into a lock, making a key stuck (the lubrication can help with the removal). 

The best type of deadbolt depends on your specific needs. If accessibility is your primary concern, a single-cylinder deadbolt is the easiest to operate. Mortise locks are likely the most secure type of deadbolt you can install, but single-cylinders combined with secondary locking mechanisms like vertical locks are also a great option. Smart locks will give you the most flexibility to open and close your locks whenever and wherever you need to. 

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.

If your key breaks in a lock, first remain calm and avoid forcing the broken piece further in. You may be able to remove it yourself if a portion of the key is still protruding from the lock. To aid removal, lubricate the keyhole with a graphite-based spray. Then, try using tools like pliers, tweezers, a bobby pin, or even a jigsaw blade to gently grasp and pull the broken piece out. If these methods don't work, you can't reach the key, or you're concerned about damaging the lock, it's best to call a professional locksmith for assistance.