Get matched with top epoxy flooring pros in Spearman, TX

If your garage floor is heavily soiled or stained, then it’s a good idea to powerwash it with a concrete cleaner before sealing. This process will remove dirt and debris to help the new sealer bond to the concrete properly, and it will also improve the look of your sealed garage floor. After power washing your floor, make sure you let the concrete dry completely before applying sealant, usually for 24 to 48 hours.

The actual moisture level that is acceptable for your concrete floor depends on what primer or flooring material you plan to install above it. For this reason, you should check the manufacturer’s instructions for the exact details.

Generally, the moisture levels should be 3.5% to 4.5%, although it does vary. Some products can handle higher levels of moisture, so you should always test your concrete before purchasing your flooring materials.

Investing in stained and sealed concrete can be worthwhile and may catch the eye of potential homebuyers during resale. The look is sleek and modern, allowing new buyers to envision a versatile list of home decor options. Stained concrete floors are also easy to maintain and feature a custom look that stands out compared to gray, unsealed concrete surfaces.

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.