Get matched with top insulation pros in Slaton, TX

Each of the three types of wool insulation has particular disadvantages. While their R-value is higher, they all cost more than fiberglass versions. Installing mineral wool and sheep wool requires protective gear. Because of its vulnerability to insects, chemicals are used in its production. Hemp wool is more costly to install than other types because additional tools and labor are involved.

If you need to insulate behind finished walls, the best option will likely be to have an insulation professional install blown-in insulation. The installation requires small holes cut in your wall, after which the installer can blow loose-fill insulation into the void. After the installation, you’ll have minor drywall patching, which shouldn’t cost more than $100. Compared to ripping down the existing drywall, using a different type of insulation, and replacing and finishing the drywall, this should save you hundreds or even thousands, depending on the size of the room you’re insulating.

Most heat in a garage is lost through air leaks in windows, doors, and walls. This is especially true if the walls are uninsulated, which is common in garages. Consider insulating your garage before installing a garage heater to ensure the heat it generates isn’t wasted, making it less efficient.

It is normal for the attic to be hotter than the rest of the house in the summer, but only by about 10 or 20 degrees. Attics that aren’t properly insulated or ventilated can reach temperatures of 130 degrees or more which can cause damage to the home’s structure, including the roof, wood framing, and HVAC system.