Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Mount Pleasant, TX

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Mount Pleasant, TX?

Select your specific project to find the pro for you.

TRUSTED BY MOUNT PLEASANT, TX HOMEOWNERS

  • Average homeowner rating star icon4.3
    Average homeowner rating
  • Verified reviews icon13
    Verified drywall insulation services reviews

Find Drywall insulation pros in Mount Pleasant

BluSky NM Drywall Lath & Plaster Inc
4.8(
249
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Mount Pleasant, TX and surrounding areas

In business since 1994

Free estimates

Emergency services offered

"The owner provided a quote and performed all services in accordance with the quote.  He was very knowledgeable and helped educate us to the process. Although we had a very slightly lower bid from another vendor, we decided that BluSky would provide a better service.  They were more confident, seemed better prepared, and more professional.  I was concerned about protecting my expensive floors and household fixtures from any damage during the process, and the owner gave me confidence that they would take care to cover surfaces and take safeguards to prevent scratches, etc.  And they did!  The work was done on time and the results are excellent.  It is impossible to tell that there was ever any water damage to my home.  The quality of drywall/plaster work was "high end" and perfectly matched the other surfaces in my home.   I was very pleased.
"
Additional Photos
Additional Photos
Additional Photos
Recommended by98%of homeowners
Avatar for Envirotech Foam & Coatings, LLC
Envirotech Foam & Coatings, LLC
4.7(
27
)
Blown-In Insulation - Install or Upgrade

Serving Mount Pleasant, TX and surrounding areas

In business since 2015

Free estimates

Warranties offered

"Admittedly a little more expensive, Scott gave me an education on spray foam insulation. I decided to go with them because he understood the process so well it just made me comfortable with the decision. Mini split installation and seal the cement and I’m gonna have a very comfortable place to work year round."
Big Zach's Restaurant
Big Zach's Restaurant
Newly Restored Everest Foam and Silicone Roof
Livingston Roof Before Restoration
Jacksonville Showroom/Warehouse

+2

Response time6 hrs
Response rate93%
Recommended by92%of homeowners
Avatar for ADT Solar
ADT Solar
4.4(
111
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Mount Pleasant, TX and surrounding areas

In business since 2008

Free estimates

Warranties offered

"MARC JONES CONSTRUCTION TEAM  ARRIVED ON SCHEDULE AND INSTALLED THE SOLAR ARRAY OVER TWO DAYS.  ON MONDAY, WE HAD INSPECTION AND A FEW DAYS LATER THE ATTIC WAS INSULATED WITH FOAM TO REDUCE HEAT LOAD ON AIR CONDITIONING SYSTEM.  EVERYTHING WENT SMOOTHLY EXCEPT FOR INADVERTANTLY UNPLUGGING THE SYSTEM CIRCUITBREAKER DURING THE FOAMING OPERATIO.
"
11 kW PV Installation
5 kW PV Installation
9.5 kW PV Installation
Recommended by89%of homeowners
Tucker's ProFoam Insulation LLC
5.0(
2
)
Injection Insulation - Install

Serving Mount Pleasant, TX and surrounding areas

In business since 2020

Free estimates

Credit card accepted

Tuckers ProFoam is a family and veteran owned company. Our professional goal is to save you the customer on high energy cost. As well as on foundation lifting. We also help you get tax credits up to $1200 back on your taxes In 2023 through a tax credit program from the government for cutting back on green house gasses. \n

Response time1 day
Response rate91%
Recommended by100%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Mount Pleasant, TX and surrounding areas

In business since 1971

Credit card accepted

"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
B&J Insulation
5.0(
2
)
Injection Insulation - Install

Serving Mount Pleasant, TX and surrounding areas

In business since 2018

Free estimates

Credit card accepted

With over 15 years of experience, B&J Insulation is your premier insulation professional servicing residents across Texas! At B&J Insulation, we always make good on our promise to deliver professionalism, punctuality and customer satisfaction to all of our clients. We specialize in spray-foam insulation and roof coatings. No job is to big for us to handle. For a professional you can trust to get the job done right, give B&J Insulation a call today for your free estimate!

Interior wall
Before
Foam roof
Foam roof
Response time2 days
Recommended by100%of homeowners
Avatar for AIR NETWORK A/C & HEATING
AIR NETWORK A/C & HEATING
5.0(
10
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Mount Pleasant, TX and surrounding areas

In business since 2003

Free estimates

Emergency services offered

"I received 3 quotes on installing a new 5 ton unit to our house air network was $2,000 cheaper than the # 2 bid and over $3000 cheaper than the other bid. They came when they said and chris was very knowledgeable. We had a new unit installed as well as all new ducting and blown in insulation. I would highly recommend air network in the Weimar area"
Recommended by100%of homeowners
Showing 1-10 of 17
Drywall Insulation questions, answered by experts

You can technically just paint over hairline cracks in plaster since these cracks are often harmless, but this will mostly be a waste of paint. Paint will only hide the hairline crack for a few months before it shows up again. The best solution is to repair the crack with flexible filler or joint compound before repainting.

In most cases, no, you won’t need a permit to replace drywall. If you’re changing the floorplan of your home by adding or removing walls during the drywall project, then you might need a permit, but replacement or repairs usually doesn’t require a permit. Your drywall professional should be able to confirm whether or not a permit is required for your project. If it is, it’s likely to add between $50 and $150 to your total cost. Keep in mind that you will need permits if you plan to install new electrical wiring or plumbing lines behind your new drywall.

If your home was built before the 1940s and was not remodeled in the past 50 or so years, you probably have plaster walls. Aside from assuming, there are some practical ways to tell if you have plaster walls, including the following: If you knock on the wall and it feels solid, not hollow, if you can’t insert a thumbtack easily, if there are cracks that look like spiderwebs, or if your home has curved, arched, or swirled walls, doorways, or window openings.

If you have an unfinished basement or attic, you could examine the backs of any finished walls to check, too.

When sanding drywall mud, you’re going to create a very fine dust that may contain silica. Silica dust contains crystalline silica, which can cause long-term illnesses for people who inhale it in significant quantities. Wear a mask while sanding drywall. Then dampen a drywall sponge to wipe the dust off the drywall, helping to reduce the amount of dust that may become airborne.

Drying alone can take 1 to 4 hours to dry to the touch per plaster layer, but some types of plaster take several hours longer to dry. However, this doesn’t mean the job is done because plaster doesn’t fully harden until it cures, which can take a few days to a couple of weeks. It may take even longer if you’re building a new, pretty thick plaster wall. Allow the plaster to cure before painting it.

The Mount Pleasant, TX homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.