Get matched with top masons in Marfa, TX
Top-rated masons.

Need a pro for your masonry work project in Marfa, TX?

Select your specific project to find the pro for you.

Find Masons in Marfa

E-Tex Foundation Repair
4.3(
44
)

Serving Marfa, TX and surrounding areas

In business since 1975

Free estimates

Emergency services offered

"Mr. Ed Wise at E-Tex Foundation Repair in Gladewater, Tx (903-331-3278) said the procedure would take a total of three days, told me everything that needed to be done, and kept in touch.  He called the day before to tell me they were coming out the next morning.   He and the crew were very friendly, and worked quickly, efficiently, and professionally.  After digging out four pier holes, they laid cement and left it to dry through the next day.  He called the next day and let me know when they were coming out on the third morning.  They arrived on time and jacked the slab to re-level and shimmed with solid concrete blocks and plate steel shims.  Ground areas that had been lost were filled in with dirt and well-packed, and concrete pieces and dirt stabilized my driveway.  Everything was cleaned up from the work area, and I was extremely happy with the results.  I would recommend this company of very friendly, very competent people to everyone I know.  With the work guaranteed (with a transferable warranty) for 30 years, I have nothing but the best to say about the people and the services rendered.  Excellent communication from Mr. Wise beginning with my first email to the company for a bid through the completion of the job!
"
Recommended by80%of homeowners
Request Quote
Showing 1-10 of 19
Masonry questions, answered by experts

Yes, you can use a mixture of 1 tablespoon of bleach and a gallon of warm water to clean stubborn stains from brick. Do not use bleach without diluting it in water. Undiluted bleach may cause discoloration. You can use either Oxygen bleach such as OxiClean or chlorine bleach. Always wear protective gloves and eye protection when handling bleach.

Unfortunately, there are many disadvantages to stone houses. They are slow to build and the materials are pricey, both of which balloon the total cost. Stone walls require a more robust foundation, which costs more to install. Running plumbing, electrical, and HVAC through a stone house is much more difficult too, so homeowners need to seriously consider if the aesthetic benefit is worth the cost of building with stone. One of the questions to ask a masonry contractor is if a similar aesthetic can be achieved with another material.

Europe is a continent made of many individual countries with a history of city life. In these cities, dirt roads were unsanitary and often shifted. The Ancient Romans started laying cobblestone streets in the 3rd century, which became an iconic feature of European cities. The durable and practical paving material proved to be extremely weather-resistant.

You will repoint over a fraction of the old mortar, but you should scrape away 1/2 to 1 inch of mortar from the joints before repointing. Otherwise, the repointing is only masking the weakened mortar instead of actually replacing it, which could put your chimney at risk of bigger, more expensive damages later on.

Cobblestone is not a type of rock but a term for a mosaic or rock laid down as a surface. It used to be made from the closest available stone but now can be made from nearly any hard rock, as machining has made shaping the stone much easier and cheaper.

The Marfa, TX homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles