Get matched with top wallpaper removers in Laredo, TX

While it is possible to paint over wallpaper, it is generally better to remove it first to guarantee a smooth, professional finish. Painting over wallpaper can save time, but it may lead to issues if not done correctly.

You can paint over existing wallpaper if it is in excellent condition: smooth, non-textured, clean, and firmly adhered to the wall. Ensure there are no bumps, tears, or peeling areas, and that all corners and seams are securely glued down. You might also consider painting over wallpaper if removing it would damage the underlying wall. Additionally, some wallpapers are specifically designed to be paintable, which can add texture to a room.

However, there are risks. If the wallpaper is textured, damaged, or peeling, these imperfections will show through the new paint. The moisture from the paint can also loosen the wallpaper's adhesive, causing it to bubble and potentially damage the wall. To mitigate these issues, clean the surface thoroughly and use an oil-based primer to help the paint adhere and prevent the old adhesive from bleeding through.

Small amounts of wallpaper can be thrown away in your household trash. If you’re removing a whole home’s worth of wallpaper, you may need to contact a waste removal company, rent a dumpster, or schedule a special pick-up with your municipality’s waste removal service. Wallpaper isn’t recyclable, so no matter which method you choose to dispose of it, make sure it doesn’t get mixed in with the recycling.

To remove pre-pasted wallpaper, you’ll need to wet the wallpaper or steam it to loosen the paste on the back of the wallpaper. Spray the paper with water, then let it soak for 10 to 20 minutes. From there, you should be able to peel off the wallpaper. Then, you may need to follow up with a cleaning solution and a scraper to remove any remaining wallpaper paste on the walls.

Limewash can be removed from brick, but the method of removal will depend on how long the limewash has been on the brick. If the limewash has fully dried—which happens after about five days—you’ll need to use a diluted muriatic acid mixture to remove it. If there are multiple coats of limewash, you may need to apply the acid mixture several times to fully remove it from the brick.