Get matched with top countertop and backsplash pros in Lamar, TX

Yes, you can remove a countertop without breaking it. It is possible to save your countertop to use in your new kitchen, donate it, or sell it! You’ll just need to work carefully as you follow the removal steps above. If you’re not sure you can get the job done without causing a little damage, call in a pro for peace of mind.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Corian® is a popular countertop alternative to quartz. Created from an acrylic resin and natural minerals, Corian® resembles quartz and offers some similar benefits, but it comes at a cheaper price. Corian® countertops cost an average of $26 to $65 per square foot, which is less than half of what quartz countertops usually cost. The downside is that Corian® isn’t as durable as quartz, particularly regarding its resistance to scratches and high temperatures.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.