Get matched with top plaster repair specialists in Edna, TX

Plaster can be a difficult DIY to master, especially if you plan to plaster an entire room, rather than patch a small area. Before you begin a plaster DIY project, you need to know which tools and type of plaster to use. It's also important to know how to prepare the surface and apply the plaster for a smooth finish. If that all sounds like a lot of work, you may prefer hiring a local plaster repair contractor to do the job.

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.

Although their applications are very similar, no drywall compound and spackle are not the same thing. Spackle is a bit thicker and is used to patch holes as it dries quickly and is easy to sand. Joint compound shrinks a bit more and can be more temperamental to spread. However, one benefit is that you can use joint compound as spackle (for small jobs), but you can’t use spackle as joint compound.  

It is possible to repair plaster walls yourself, but it’s not always a good idea. Hiring a professional means you’ll have expert eyes on the damage looking to see if there is an underlying issue or if the cracks are just from normal expansion and contraction. Additionally, a professional’s plaster repair will very likely last longer than a DIY job, which means you could end up saving money over time by going with a pro from the start.