Best door pros near Coppell, TX

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

You can use any wood to make an interior door, provided it’s the right thickness. Common options for painted doors include pine or poplar for the stiles, rails, and mullions, and paint-grade plywood for the panels. You can also opt to make your own panels out of pine or poplar if you intend on staining the door instead. Opting for oak, maple, or another hardwood is another great option for a high-end door that will last for decades, but the wood will cost significantly more.

Yes, you can add a screen door to most door frames. The screen should be able to fit standard-size door frames, so unless you have an unusually sized door, you shouldn’t have an issue. Just make sure to properly measure the frame. When in doubt, it’s best to let a pro take care of this task for you so it’s installed correctly.

The width of your door jamb should match your wall thickness exactly, so it depends on your wall. For standard door openings, the width is equal to the width of a 2-by-4-inch  stud, plus the width of the drywall on both sides—about 1/2 inch each—which comes out to 4 9/16 inches. Block walls and framed walls that use 2-by-6-inch framing require a door jamb that’s 6 9/16 inches. You should always measure your finished wall thickness to get an accurate width for your door jamb material.