
Need extra clearance for getting your vehicles into your garage? Find out how much it costs to convert two garage doors to one double door in this cost guide.
Replacing a garage door in Dallas, TX costs $922 on average, but ranges between $555 and $1,290 depending on the type of door used.


Homeowners comparing garage door replacement costs in Dallas should know that sectional doors often start at $1,200.
Carriage-style garage doors in Dallas reach $2,500 or more, as they feature heavier materials and decorative hardware that add both charm and expense.
Glass roll-up garage doors can exceed $4,000 in Dallas, reflecting the premium price for modern aesthetics and the tempered framing these models require.
Homeowners in Dallas, Texas should plan carefully when budgeting for a garage door replacement. Garage door replacement in Dallas costs $922 on average, but prices range from $555 to $1,290.
With North Texas’s hot summers and occasional severe storms, many residents opt for insulated or wind-rated doors that provide better energy efficiency and durability. The door’s material, size, and design all influence the final price, along with local labor rates and installation complexity.
When planning garage door replacement in Dallas, TX, costs depend on door type, material, and size. Sectional and roll-up doors are common locally, while carriage or glass styles add customization and higher expenses.
The type of garage door you choose will influence the total project cost, with standard options (such as sectional and roll-up doors) costing less than custom ones (such as French or carriage house doors). Like most projects, the further you move away from common materials and styles, the more expensive it’ll be.

| Door Type | Average Cost | Description | 
|---|---|---|
| Sectional (steel, insulated) | $1,200–$2,800 | Most common style in Dallas; multiple hinged panels that roll up; insulation and steel help with Texas heat | 
| Tilt-up (one solid panel) | $1,100–$2,500 | Single large panel that tilts out and up; simpler mechanics; requires space; heavier handling | 
| Carriage house/carriage-style | $2,500–$6,000+ | Decorative style with heavier materials; custom trim/hardware adds considerable cost in Dallas market. | 
| Roll-up/sheet-metal coil | $1,500–$3,000 | Door coils vertically above the opening; useful for tighter spaces and side room restrictions | 
| Glass roll-up (frameless or glazed) | $4,000–$9,000+ | Premium aesthetic door with tempered/laminated glass panels and special frames; often seen in high-end homes | 
| French doors (dual swing doors) | $2,000–$5,000+ | Two side-swinging doors instead of a traditional overhead door; needs strong anchoring and weather-proofing | 
| Walk-through (pedestrian door built-in) | +$300–$800 extra | Adds smaller pedestrian access door within or beside the main garage door; increases complexity and cost | 
If you’re wondering how much a new garage door costs, take a look at this breakdown by material type.
| Material Type | Average Cost | Pros | Cons | 
|---|---|---|---|
| Steel | $1,000–$3,000 | Durable; affordable; low maintenance, widely available in Dallas | Can dent from hailstorms; less insulating without upgrades | 
| Aluminum | $1,200–$2,800 | Lightweight; rust-resistant; good for Dallas humidity swings | Easier to dent; insulation often limited | 
| Wood | $2,500–$6,000+ | Classic curb appeal; customizable finishes; popular in Dallas luxury homes | Requires sealing/maintenance in Texas heat and humidity | 
| Fiberglass | $1,500–$3,500 | Resistant to warping; lightweight; mimics wood appearance | Can crack in extreme Dallas summer heat; limited availability | 
| Vinyl | $1,000–$2,500 | Dent-resistant; low maintenance; long lifespan | Fewer style options; can fade in Texas sun | 
| Glass (frameless or framed) | $4,000–$9,000+ | Modern aesthetic; brightens interiors; popular in upscale Dallas builds | Very costly; requires reinforced framing and regular cleaning | 
| Composite (wood + steel blend) | $2,000–$5,000 | Combines wood look with steel strength; good insulation | Mid-to-high cost; fewer style choices than pure wood | 
Extreme heat and intense sun exposure can warp non-insulated doors, fade finishes, and weaken seals. Insulated doors made of steel or composite models help regulate garage temperatures, while UV-resistant finishes protect against cracking and peeling common in hot, sunny climates like Dallas.
Still comparing types and materials? Read through these tips for buying a garage door to help narrow your options. For guidance on choosing the right pro, see who to hire for garage door repair or installation.
The standard single-car garage door in an American house is between seven and 10 feet wide and seven to eight feet tall. As you can expect, two-car garage door replacement costs will be higher—and the same goes for three-car garage doors. Opting for multiple single garage doors (instead of double doors) will also raise your price tag, as these require more labor and materials to install.
Some homeowners choose garage doors that aren’t a standard size. Garage doors with custom measurements will be more expensive to replace.
| Size (Feet) | Average Cost | 
|---|---|
| Single-car (8x7) | $900–$2,500 | 
| Double-car (16x7) | $1,400–$3,800 | 
| Three-car (24x7) | $2,500–$5,500+ | 
| Oversized/custom sizes | $3,000–$7,000+ | 
When budgeting for garage door replacement in Dallas, TX, it’s important to look beyond just the price of the door itself. Labor, permits, taxes, and even tipping practices all influence the final project cost.
Professional garage door replacement in Dallas, TX, ranges from $300 to $650, depending on door size, material, and complexity. Homes with limited alley access or oversized custom doors may require additional crew members and longer installation times, which can increase costs. Reputable installers often include haul-away fees for the old door, so it’s wise to confirm what’s covered in advance.
Permit requirements in Dallas vary depending on whether structural work is involved. For standard garage door replacements, many homeowners may pay $50 to $200 for city permits. However, if electrical work for a new opener or framing modifications are needed, fees can rise. Always check Dallas Development Services guidelines, as failing to secure proper permits could result in delays or fines.
Texas doesn’t charge state income tax, but homeowners in Dallas should expect sales tax on both materials and labor. The combined sales tax rate in Dallas is 8.25%, which adds a noticeable percentage to your project total. This tax applies whether you’re purchasing from a large retailer or hiring a local independent installer.
While not mandatory, tipping is a common practice in Dallas when garage door crews provide efficient, careful service. Homeowners often tip between $20 and $50 per worker for a smooth installation. Alternatively, providing cold drinks in summer or a positive online review is also appreciated by many Dallas-area installers.
Texas’s high temperatures accelerate wear on weatherstripping, panels, and opener systems. Regular lubrication, seal replacement, and repainting help maintain durability. Factoring in inspection costs before peak summer ensures your garage door remains reliable and efficient during extreme Dallas summers, and can help save on repair costs in the long run.
When it comes to resale value in Dallas, a smart upgrade like replacing your garage door can make a meaningful difference. The most recent national data shows that home sellers can recoup up to 194% of the cost of a garage-door replacement in the West South Central region (which includes Texas).
In a metro area like Dallas, improving curb appeal, energy efficiency, and functionality all combine to enhance marketability—and investing in a quality new garage door is one of the highest return on investment (ROI) projects you can choose.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
From average costs to expert advice, get all the answers you need to get your job done.

Need extra clearance for getting your vehicles into your garage? Find out how much it costs to convert two garage doors to one double door in this cost guide.
.jpg?impolicy=leadImage)
This guide shows you what you can expect for garage door roller replacement cost if your rollers are sticking or screeching.

This guide will help you determine the true cost of installing garage door openers. You’ll need to consider type, horsepower, and other factors.

Wondering what components make up your garage door? Learn about all of the parts of a garage door so you know what to repair if something goes wrong.

Solve why your garage door isn't opening with your remote control using these common causes and fixes.

Though you can install a garage door on your old tracks, you might not want to. Keep reading to learn if you can install a new garage door on old tracks.