Best countertop and backsplash pros near Coppell, TX

With the cost of kitchen countertops ranging from $1,900 to $4,300, you’ll want to choose a countertop material that’s durable and cost-effective. Marble countertops will come in on the high-end, whereas corian, quartz, stainless steel, and granite will run in the middle range. Butcher block and laminate are the most budget-friendly—and many DIYers choose to install butcher block on their own because it’s one of the more accessible countertops.

A countertop is a broad term that applies to multiple rooms in the house, like kitchens and bathrooms. Meanwhile, a vanity top is specifically associated with bathroom cabinets. In short, all vanity tops are countertops, but not all countertops are vanity tops. When discussing a bathroom, the phrases “countertop” and “vanity top” are used interchangeably.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Rubbing alcohol won’t damage most countertops, and you can mix it with water to create a disinfecting spray to keep your kitchen clean. It’s safer than using bleach on countertops, which can stain and cause discoloration. Be careful with rubbing alcohol when it comes to lacquered or varnished surfaces, though.