Get matched with top interior painters in Commerce, TX

It’s best to use a slightly slower-working paint remover that is safer to use, such as mineral spirits, because the strongest spray paint removers are often also the most toxic. Many of these products contain dangerous chemicals, such as methylene chloride, which the EPA banned for most uses in April 2024 after it was established as a major carcinogen.

The easiest way to remove window decals is to soak the area in hot, soapy water. Let it sit for 15 minutes before scraping it with a plastic scraper or the edge of a credit card. You can also remove window decals with white vinegar, rubbing alcohol, or applying heat from a hairdryer or steam cleaner.

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

Most handy homeowners can tackle removing texture from unpainted walls. Removing texture from painted walls is a bit trickier. Paint acts as a sealant, so you can’t soften the texture with water. Instead, you’ll have to add a layer of drywall compound known as a skim coat. This process is messy and takes some practice.