Get matched with top door pros in Commerce, TX

While not strictly required, it is highly recommended to shim both sides of a door. Shimming both sides allows you to make minor adjustments for wall framing that isn't perfectly plumb, ensuring the door is level and hangs evenly. This practice helps the door swing open and close smoothly, reduces the chances of the frame warping, and can be used to center the door within the wall opening. If you are working alone, you may find it easier to remove the door slab to lighten the weight while supporting the frame and inserting the shims. With two people, the process is generally faster and easier, whether the slab is left in place or not.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

You can use any wood to make an interior door, provided it’s the right thickness. Common options for painted doors include pine or poplar for the stiles, rails, and mullions, and paint-grade plywood for the panels. You can also opt to make your own panels out of pine or poplar if you intend on staining the door instead. Opting for oak, maple, or another hardwood is another great option for a high-end door that will last for decades, but the wood will cost significantly more.

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.