Get matched with top fencing pros in Clint, TX

The depth of your post hole depends on your post length. If you decide on a two-rail fence, the posts are likely 6 feet long. You want your hole to be at least 1/3 of the post length. In this case, your post hole should be two feet deep.

If you opt for a three-rail fence, the posts will typically be 7 feet long, meaning your post hole should be 28 inches deep.

When your rolls of silt fence join together, you’ll want to overlap them to make sure they’re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood. 

It’s usually cheaper to buy pre-made fence panels than to build your own. This surprises many people since DIY tasks so often save money. However, large stores don’t have to pay the same amount per board of wood that homeowners do, allowing them to sell pre-made panels at a more cost-effective rate. Pre-made panels also save a great deal of time, energy, and guesswork. The drawback is that they are harder to customize to the shape and slope of your yard.

This depends mainly on how well the posts were installed and what type of wood was used to build the gate in the first place. Softwoods have a life expectancy of up to 15 years but can last slightly longer with regular maintenance and waterproofing treatments. By contrast, hardwoods can last up to 30 years with little care, so you may avoid costly replacements by spending a little more upfront.