Get matched with top woodworkers in Centerview, TX

Q: Is it easier to cut wood when it’s wet or dry?

• <div><p>Whether or not it&rsquo;s easier to cut wood when it&rsquo;s wet versus dry depends largely on the type of tool you use and the wood you&rsquo;re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw. </p><p>However, you might want to avoid cutting wood entirely when it&rsquo;s wet if you&rsquo;re pruning your tree. Sawing a wet tree that you don&rsquo;t plan on removing can also encourage bacterial and fungal growth and decay.</p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: How long will landscape timbers last in the ground?

• <div><p>Landscape timbers can last <b>10 to 20 years</b> in the ground when installed correctly. Pressure-treated timbers will last longer than non-treated ones, as pressure treatment makes the wood more rot-resistant. Wood exposed to high moisture levels or extreme temperature and weather fluctuations may not last as long as wood in drier areas with more consistent weather.</p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Centerview, TX?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Centerview, TX

*The Angi rating for Woodworking companies in Centerview, TX is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Centerview, TX is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on September 18, 2025

Reviewed in September 2025
He did a great job. First he upgraded meter base, added the auto switch for generator, and new outside breaker box. He keep everything nice and neat and clean work area. He was here when he said he would be no delays. He keep in contact with me all the way through the job. Very easy to work...
Brightwire Services LLC
Request a quote
Reviewed in January 2025
On time with exceptional communication. Got the job done professionally and promptly, and I have ZERO complaints. I highly recommend Around the Clock Electrical for all of your remodel/repair electrical needs. My whole house backup generator is now professionally installed, my shed now has...
Around the Clock Electrical Services LLC
Request a quote
Reviewed in November 2024
The tech who came out was very professional and knowledgeable in his field. He done an outstanding job. Thank you guys !!
Stampede Pest Control, Inc.
Request a quote
Reviewed in September 2024
I hired Mr. Brew to replace my fence gate. He gave me a quote one day and was able to put up the gate the next day. He was very reasonable in price and the gate looks wonderful, I would definitely recommend him for your fencing projects. He is very knowledgeable.
Fence & Deck of Texas
Request a quote
Reviewed in January 2024
I've had Starlyn cut down trees on two separate occasions and both times the job was done to my satisfaction. He's professional, courteous and will get the job done. I highly recommend him.
H 3 Land Management
Request a quote
Reviewed in November 2023
The work was done under estimate! Robert was friendly and obviously knowledgeable. His work was done well and efficiently!
HINJ Construction
Request a quote
Reviewed in April 2023
Very good service, good customer relations, any small issues have always been dealt with to my satisfaction, and I am very pleased to have them as my cleaning company.
Alma's Cleaning Service
Request a quote
Reviewed in November 2022
They arrived when they said they would. They had all the equipment and man power to do the job. They did all the cutting an clean up very quickly and more importantly left our property undamaged, surrounding plants were not destroyed and the mess was cleaned up. All of the workers and Mr.Stains...
Stains Land Management
Request a quote
Reviewed in September 2022
They did a really good job, very professional, well priced and does a magnificent job.
K n J Outlaw Construction
Request a quote
Reviewed in August 2022
The best repairman of all time! A+ in all areas!
VR Appliance Repair
Request a quote

Find Woodworkers in Centerview

Aqua Werx, LLC

4.8(

)

Arbor, Pergola or Trellis - Build CustomGazebo or Freestanding Porch - Repair

Serving Centerview, TX and surrounding areas

Approved

In business since 2014

Free estimates

Credit card accepted

"Easy to deal with, professional and made an accommodation to do the work right away. That was awesome."

Response time2 days

3 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Balanced Earth Construction

4.2(

)

Carpentry Framing - RepairInterior Trim and Decorative Moldings - InstallWood Stairs and Railings - Install or Replace+1 more

Serving Centerview, TX and surrounding areas

Approved

In business since 2005

Small jobs welcome

Customers say: Quick response

"He did a fantastic job. He even went to 2 different stores to get the door for me because the first door was damaged. He knocked the project out in about an hour."

Response time1 day

Response rate90%

4 neighbors recently requested a quote

Request Quote

Caylor & Son Handyman

4.9(

)

Gazebo or Freestanding Porch - RepairGazebo or Freestanding Porch - Repair - For BusinessInterior Trim and Decorative Moldings - Repair+2 more

Serving Centerview, TX and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"I highly recommend this company. They came right out and despite what turned out to be a challenging project they got right on it and came up with a great solution. Very trustworthy and diligent. They worked hard to figure this out and at such a reasonable cost."

Response time1 day

Recommended by100%of homeowners

Carpentry Framing - Install

Serving Centerview, TX and surrounding areas

Approved

In business since 2024

Free estimates

Offers commercial services

"Gerhart & Jerry Weise are the best you will find in Central Texas !! I was a custom Home Builder for 30 years down around Hilltop Lakes Texas and the framed every home I ever built and always were very professional and reliable ! DeWayne Northcutt"

Response time2 days

Response rate100%

Request Quote

Moorish Weld co.

New to Angi

Custom Cabinets - Build

Serving Centerview, TX and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

With a combined 14 years of experience in metal and wood work. We are able to offer services from welding to cabinet/trim work. \n\nWe service the surrounding areas of Austin, Houston & College Station.\n\nWe specialize and welding repair/metal fabrication and wood repair/installation and fabrication and finish. \n\nOur Motto is Precision. Strength. Legacy. And we strive to meet and keep that reputation.

Request Quote

Lee Neel

New to Angi

Custom Cabinets - Build

Serving Centerview, TX and surrounding areas

Approved

Free estimates

Small jobs welcome

Offers commercial services

I have been in the construction business for the last four years full time. I can handle anything from new construction projects, remodeling, or just some honey do projects. If you need a new ceiling fan or a new deck or maybe just your lawn mowed, I can handle it.

Request Quote

HomeWorx Renovations

New to Angi

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+6 more

Serving Centerview, TX and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

I’m a general contractor with hands-on experience in residential renovations, repairs, and property improvements. Through my business, HomeWorx Renovations, I’ve managed projects from planning and estimating to completion, with a strong focus on quality workmanship, clear communication, and customer satisfaction. I take pride in solving problems, staying organized, and delivering projects on time while building lasting relationships with clients.

Request Quote

Just work BCS

New to Angi

Custom Cabinets - BuildFurniture - Build Custom

Serving Centerview, TX and surrounding areas

Approved

Free estimates

Credit card accepted

Offers commercial services

Local and affordable, with over 10 years off experience in plumbing, electrical, remodeling, HVAC, right down to minor repairs. We do it all!

1 neighbors recently requested a quote

Request Quote

Ascended Constructions

New to Angi

Carpentry Framing - Install

Serving Centerview, TX and surrounding areas

Approved (Corporate)

In business since 2023

Offers commercial services

Were a family owned and operated company that values honesty and integrity, and stands behind our work. We offer over 40 years of industry experience. We specialize in Asphalt Shingle Roofing installation, replacement, and repairs. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

324 neighbors recently requested a quote

Request Quote

Jimmy jones

New to Angi

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+5 more

Serving Centerview, TX and surrounding areas

Approved

Emergency services offered

Small jobs welcome

Offers commercial services

I’ve been in the general maintenance and remodeling buisness going on 15 years now some assembly and appliance repair as well

Request Quote

...

Showing 1-10 of 92

Woodworking questions, answered by experts

Whether or not it’s easier to cut wood when it’s wet versus dry depends largely on the type of tool you use and the wood you’re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw.

However, you might want to avoid cutting wood entirely when it’s wet if you’re pruning your tree. Sawing a wet tree that you don’t plan on removing can also encourage bacterial and fungal growth and decay.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

Landscape timbers can last 10 to 20 years in the ground when installed correctly. Pressure-treated timbers will last longer than non-treated ones, as pressure treatment makes the wood more rot-resistant. Wood exposed to high moisture levels or extreme temperature and weather fluctuations may not last as long as wood in drier areas with more consistent weather.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Centerview, TX homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Sep 26, 2026Sep 26, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.