Get matched with top masons in Canton, TX

Yes, masonry is more expensive than concrete because the labor is much more involved. With masonry, your expert will build your project from the ground up, one piece at a time, ensuring they use the proper amount of mortar or grout during construction and keeping the project level or plumb. Pouring concrete can also be labor-intensive, but it’s a bit less involved. It requires building a mold, pouring the concrete, and letting it cure. The less intensive labor makes concrete a more affordable option in most cases.

Whether you’re installing brick siding over a traditionally-framed home or you’re using genuine brick construction to build, the biggest downside of a brick house is the higher cost you’ll pay for the materials and labor. Real brick construction also means your home build will take longer, as it’s more time-consuming to construct brick walls than it is to frame out your home.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

The cost of masonry work varies widely depending on the type of masonry along with common cost factors like size, complexity, location, and season. Most exterior masonry work done in freezing temperatures tends to cost more because of the preparation and protection involved to keep the masonry from freezing before the mortar cures properly. The average price ranges per project or square foot for different types of masonry include:

• Brick wall (fence, garden wall, etc.): $10–$45 per square foot

• Natural stone wall: $40–$110 per square foot

• Manufactured stone veneer: $20–$40 per square foot

• Brick home exterior: $10–$30 per square foot

• Brick siding: $3–$10 per square foot

• Stone siding: $35–$50 per square foot

• Brick step replacement: $20–$30 per square foot

• Brick wall repair: $20–$40 per square foot

• Chimney repairs: $160–$750 per project

• Tuckpointing: $5–$25 per square foot