Get matched with top locksmiths in Tusculum, TN

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

If your key breaks in a lock, first remain calm and avoid forcing the broken piece further in. You may be able to remove it yourself if a portion of the key is still protruding from the lock. To aid removal, lubricate the keyhole with a graphite-based spray. Then, try using tools like pliers, tweezers, a bobby pin, or even a jigsaw blade to gently grasp and pull the broken piece out. If these methods don't work, you can't reach the key, or you're concerned about damaging the lock, it's best to call a professional locksmith for assistance.

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.

First thing first: Make sure you’re using the right key. If it’s the correct key for your lock, there are a few reasons why it may not be working, like the key is worn out or the lock is jammed. Try lubricating the lock and pushing the door closed to ensure the mechanisms work correctly. If you’re still locked out, call in for help.