Get matched with top flooring contractors in Pleasant View, TN

You can lay your laminate flooring in whichever direction you'd like. However, you should check your materials' instructions and see what the maximum length limit is for the installation. This differs according to the brand you buy, but you can expect it to be around 40 linear feet. Depending on the size of the room, this might dictate which direction you end up laying the planks.

With so many vastly different options to choose from, how can you find an inexpensive garage floor that you can also confidently say is the best? The right solution will be different for everyone and truly depends on your individual needs and stylistic tastes.

If you’re working with a smaller budget, a low-cost coating such as paint, sealer, or stain might be the best way to express your style in the garage. If you need a high-performance surface that can handle the tough projects and maintenance you do in the garage, or if you want a wide range of colorful customization options, flexible tiles might be for you.

No, when done correctly, removing the tile shouldn’t damage the subfloor. However, if there was pre-existing damage to the subfloor from standard use or lack of maintenance, the subfloor may need repairs. For example, if the contractors notice mold growth on the subfloor or an uneven surface, you may need more extensive services before installing new tile.

If you DIY tile removal, remove the tiles one step at a time, individually removing the tile, grout, and mortar to prevent unnecessarily damaging the subfloor. Depending on the age of your home, consider having a professional inspect the subfloor to ensure it’s in good enough condition to lay new tile.

Door transitions can work with virtually any flooring type; however, different transition strips lend themselves better to specific flooring types. For instance, if you are bridging the gap between a taller floor, like carpet, to a shorter floor, like hardwood, then you will want a transition strip with a slight slope to bridge the height difference. These transition strips are called reducer molding. On the other hand, if you are bridging two floors of the same height, you can use flat transition strips, such as T-strips and seam binders.