Get matched with top concrete resurfacing pros in Woonsocket, SD

Concrete shrinkage cracks are very common and should be expected. Even professionals end up with shrinkage cracks on newly poured concrete slabs. Remember that these cracks are not harmful to the slab's strength, though some homeowners do prefer to fill in the cracks for aesthetics. When installing concrete, you can avoid ample concrete shrinkage cracks by avoiding hot, sunny, or windy days.

The average cost to replace concrete depends on the amount of material you need. However, you can expect the cost of replacing a concrete driveway to range from $2,000 to $7,000, or about $15 per square foot.

If you want to install or replace a concrete patio, the cost ranges from $800 to $9,000, depending on the size and exact materials. If you only need a slab, concrete slab costs range from $4 to $8 per square foot, or an average of $5,400.

Concrete resurfacing and concrete overlay are terms often used interchangeably to describe the process of applying a new, thin layer of pre-blended concrete over an existing slab. This process enhances the durability and appearance of the concrete, giving it a fresh look without the high cost of a full replacement. The new layer is typically between 1/4-inch and 1-inch thick, significantly less than the 4 inches required for a new slab, and can be stamped, colored, or textured for a custom finish.

While the terms are often considered the same, their meaning can sometimes vary by contractor. Some may use "overlay" to describe a thicker application that adds structural integrity, while "resurfacing" might refer to a thinner layer intended for cosmetic upgrades. Other common names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.

You can dry pour concrete over existing concrete, but it’s best to use wet pour concrete instead. Dry pour concrete is easier to apply, but in order for new concrete to adhere to old concrete, it needs the right mixture for slow, uniform curing. Additionally, dry pour concrete is less durable and less resistant to cracking and concrete sinking, so dry pouring over an existing slab may result in surface imperfections appearing prematurely.