Best fireplace pros near Parmelee, SD

Modern wood-burning stoves are very effective, reaching around 80% efficiency. That’s because models built after 1988 are designed to meet standards set by the U.S. Environmental Protection Agency to operate more efficiently and produce less air pollution. If you have an older wood stove, it may not be as efficient.

The height of the chimney for your outdoor fireplace depends on where the fireplace is located. Ideally, the chimney should be 2 to 3 feet higher than surrounding structures; this allows smoke to ventilate properly without endangering anyone or anything.

Note: Your municipality may have strict requirements regarding chimney heights, so it’s always a good idea to check local building codes.

Yes, it is possible to convert a wood-burning fireplace to gas. The average cost for this conversion is $3,000, with a typical range of $500 to $5,500. The project involves running a gas line, professionally cleaning the chimney, and installing gas logs.

Cost factors include the type of gas fireplace and whether a new gas line is needed. Installing a natural gas line can add $200 to $1,000 to the cost. Vented gas fireplaces are more expensive, averaging around $5,000, while ventless options are more cost-effective at about $1,500.

Not all gas fireplaces need a chimney. If you install a ventless gas fireplace, it will release low levels of combustion byproducts back into your living space (instead of pushing them outside through a chimney or vent). Ventless fireplaces burn fuel efficiently, so the emissions are minimal—but they could bother people with allergies or respiratory issues.