Top-rated floor polishers.

Get matched with top floor polishers in Hoven, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Hoven, SD?

Select your specific project to find the pro for you.

Find Floor polishers in Hoven

Dakota Petriwood
New to Angi

Serving Hoven, SD and surrounding areas

Fence and Deck Restoration \n\n\nAt Dakota Petriwood we specialize in exterior wood care. Our restoration services include cleaning, and sealing outdoor structures such as fences, arbors, decks, and play sets.\n\nRestoring is the key to protecting the woods natural beauty and original form.\n\nBenefits of sealing your fence:\n\nWaterproofs Wood \nExtends Wood Life\nMold, Mildew, and Fungus Resistant \nPrevent Cracking and Splitting, Rotting\nPrevent Carpenter ants, and Termites\n\n(Not Sold in Stores)\n\nCall us at 605-951-0045 or visit www.dakotapetriwood.com

Request Quote
Floor Polishers questions, answered by experts

Yes, you can polish an old cement floor. However, be aware that the first pass with the concrete grinder may reveal a few surprises and imperfections. You may also have to contend with the consequences of previous floor coverings, such as tile or carpet, which can leave a pattern in the concrete. Old concrete is more likely to produce uneven results if you want to use a dye or other coloring.

If you’re looking for commercial cleaners, just check the label to find options that say they are safe for vinyl. Otherwise, homemade cleaners work great for vinyl plank flooring. Baking soda paste works well for spot-cleaning, and vinegar mixed with water is best for all-over cleaning. You can even clean your floors with plain water, which is great for everyday maintenance.

Buffing will only remove scratches at the surface level of your flooring. You may also need to apply hardwood floor wax to restore the wax layer. To remove deeper scratches, you’ll need another floor repair method like sanding; however, if you sand the floor, you’ll also need to stain and seal it.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Services typically take 2-4 hours, depending on the area size and floor material.

The Hoven, SD homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles