Get matched with top drain pipe installers in Chamberlain, SD

Removing calcium and lime buildup will often fix a clogged faucet head. You can usually remove any buildup with distilled white vinegar or a combination of vinegar, dish soap, and baking soda. Sometimes, the problem is buildup on the aerator, in which case removing and cleaning that part should fix your water flow. However, the design of some aerators makes them difficult to clean. For those, replacing the aerator will get the faucet flowing well again.

According to the Uniform Plumbing Code (UPC), the distance between your trap and the vent should be no more than 6 feet. For your vent to work properly, it needs to feed into the drain line within 6 feet of trapways that connect to it. Using this formula, you should be able to determine whether you will need multiple vent lines.

Flex is necessary for soldering copper pipe. This acidic paste attracts the solder, pulling it deeper into the joint so the solder fills all the gaps between the two metal fittings. While many solder products contain small amounts of flux, you need to apply the additional flux paste to ensure you achieve a water-tight fit between the two copper pipes.

Applying drain cleaner is a common DIY solution to clogged drains, but it can be extremely harmful to your pipes and lead to corrosion and leaks. It is almost always better to try snaking a clog than using a drain cleaner, but the best solution is to hire a professional plumber. They can locate the clog and gauge the severity using a camera system and then decide if using a plumber’s snake, auger, or drain cleaner is the best option to remove the clog and limit damage to your plumbing system.