Get matched with top stone and gravel pros in Burke, SD

Masonry work tends to be more expensive because the materials can be costly, such as natural stone and brick. Masonry is also very labor intensive, typically making up 50% or more of the final project cost. In addition, quality masonry work requires years of training and experience, as with any skilled trade.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

You will repoint over a fraction of the old mortar, but you should scrape away 1/2 to 1 inch of mortar from the joints before repointing. Otherwise, the repointing is only masking the weakened mortar instead of actually replacing it, which could put your chimney at risk of bigger, more expensive damages later on.

Chimney mortar typically lasts 20 to 30 years, depending on its quality, local weather conditions, and maintenance. Over time, exposure to moisture, freezing, and thawing cycles can cause mortar to deteriorate, leading to cracks and gaps. Regular inspections and timely repairs, such as repointing or tuckpointing, can extend the lifespan of chimney mortar by ensuring the structure's integrity.