Get matched with top marble restoration pros in Britton, SD

Marble is a porous natural stone that needs sealant to minimize staining. Leaving this type of countertop material sealant-free means any liquids left on the surface will quickly absorb into the stone, discoloring it and dulling the sheen. Dark or acidic liquids, like red wine, coffee, and lemon, are the worst culprits. 

Standing water can lead to surface discoloration if your granite countertops are improperly sealed. However, it’s possible to remove hard water stains with a baking soda paste. Take more care with acidic liquids, such as fruit juice or red wine, which can leave more permanent stains. That’s why it’s so important to reseal these surfaces regularly.

There are three main downsides to quartzite: the cost, the porosity, and the weight. As a natural stone, there’s a level of scarcity that can drive up the price of certain types of quartzite. Even more common varieties are less affordable than synthetic materials like laminate and other natural stones like granite. 

You’ll also have to reseal your quartzite countertop annually to combat the natural porosity and reinforce your cabinets to account for the added weight.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.