Top-rated woodworkers.

Best woodworkers near Baltic, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Baltic, SD?

Select your specific project to find the pro for you.

Top-Rated Woodworkers in Baltic - Updated Nov 2026

Avatar for Quality Cabinets & More
Quality Cabinets & More
5.0(
11
)
Custom Cabinets - Build

Serving Baltic, SD and surrounding areas

Approved

In business since 1998

Free estimates

Customers say: True professional

"After considering many options for re-doing our existing natural oak kitchen cabinets, we hired Vitaliy to paint them white. We used all our original cabinets and doors, except that he suggested installing larger crown modeling, which made a huge difference in the appeal of our kitchen. He also suggested bumping out the cabinet above our microwave, which also added much character. As a part of the process, he switched all doors to hidden, soft close hinges, and installed soft close mechanisms on all drawers. Finally, we asked him to install pull-outs on a couple of our lower cabinets. He did a tremendous job, and it was so affordable that we also had him re-finish our fiberglass front door to match our overhead garage doors, finish and install new bi-fold doors in our entryway, and refinish a window seat in one of our bedrooms. We are very picky, and asked Vitality to make some minor adjustments and touch-ups to the work, which he did wonderfully, and to our total satisfaction. Vitaliy provides a tremendous combination of quality work and affordability. We are so very thankful that we found him!"
28
29
30
31
20

+27

Response time1 day
3 neighbors recently requested a quote
Recommended by90%of homeowners
Avatar for Deckers
Deckers
5.0(
5
)
Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+5 more

Serving Baltic, SD and surrounding areas

Approved

Super Service Award Winner

In business since 2019

Free estimates

Emergency services offered

"Linden did an excellent job with the replacement of our deck. He worked in a timely manner and is very thoughtful and polite. we couldn’t be more happier with the outcome. Many of our neighbors have already stopped by to complement the new deck . We will be spending many hours out there Thank you Linden."
coffee bar installion
blue pine floating shelf
blue pine floating shelf
arched bookcase
arched bookcase

+17

Response time2 days
Avatar for 3D Construction
3D Construction
4.6(
5
)
Carpentry Framing - InstallCarport (Wood) - BuildInterior Trim and Decorative Moldings - Install

Serving Baltic, SD and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"Overall very good experience. Quality work at a fair price. Good communication on progress of the project. Just a couple of small issues for follow-up that were completed in a timely fashion. I would recommend 3D to others."
custom shower pan and seat/shelf
custom shower pan and seat/shelf
new deck railing and pergola
new stairway from back yard down to the lake
match miters and grain pattern

+14

Response time7 hrs
Recommended by100%of homeowners
Lee Construction
5.0(
5
)
Carpentry Framing - RepairInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Baltic, SD and surrounding areas

Approved

In business since 1979

Free estimates

Customers say: Quick response

"When I lived in Vermillion SD, John did all of my remodeling projects from 1994-2016. These included totally gutting and finishing my kitchen; finishing a basement to include a den, bedroom, bath, and laundry room; and replacing the exterior siding and trim on my 1974 house. He is an amazing carpenter/craftsman. He is easy to work with and comes up with creative solutions to problems. He comes at a moment when notice when emergencies arise and his rate is extremely reasonable. I highly recommend John for any addition or remodeling project."
Custom Cedar deck and storm room
Kitchen done back in 2004.
2016
Response time1 day
Recommended by100%of homeowners
Avatar for Dunn's Fence Worx
Dunn's Fence Worx
4.9(
4
)
Furniture - Build Custom

Serving Baltic, SD and surrounding areas

Approved

In business since 2020

Free estimates

Credit card accepted

"Dunnâ s for it done!! Friendly, fast work, made adjustments to make it more cat proof for me, cleaned up after themselves, and super easy to work with. I get very anxious when strangers are at my home, but he and his crew were professional and I was comfortable having them work for me. Thanks!!"
Recommended by75%of homeowners
...
Showing 1-10 of 99
Woodworking FAQs, answered by experts

Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don’t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi’s contractor licensing tool to find out whether a potential carpenter is licensed in your state.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Baseboards don’t have to be nailed into studs. However, nailing them into studs adds to their stability. When studs aren’t available, you can secure them with drywall nails directly into the drywall and adhesive. Always aim to nail into studs, especially in high-traffic or impact-prone areas.

If you don’t have a coping saw, you can use an angle grinder to cope crown molding, but it takes a little more precision. Place your molding down on your workbench, angle the grinder at a 45-degree angle toward the molding, and back cut the wood. You’ll need to carefully angle your grinder to accommodate the curves in the wood, and aim to remove around 1 inch from the profile of the molding.

It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.

The Baltic, SD homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.