Top-rated deck staining pros.

Get matched with top deck staining pros in Wallace, SC

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Wallace, SC?

Select your specific project to find the pro for you.

Find Deck staining pros in Wallace

Avatar for Mike's Painting & Pressure Washing
Mike's Painting & Pressure Washing
4.7(
28
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Wallace, SC and surrounding areas

In business since 1996

Emergency services offered

Credit card accepted

"

We recently purchased a 2nd home on Lake James with an exterior that is 100% cedar.  The exterior was in serious need of cleaning and re-staining.  It had not been maintained; and, had a significant amount of mold staining and several areas of the trim had the original finish peeling off.

We contracted with Mike and Crystal to prep and re-stain the exterior of our home.  Throughout the process, Mike demonstrated thoroughness, competency and responsibility.  Mike and Crystal took personal responsibility to ensure they delivered a quality product.  Mike kept his commitments and did not compromise his work product even when faced with the stripping process taking more time than he expected.  He completed the project per the schedule he committed.

Mike demonstrated a high attention to detail in the finishing process and ensured the project was completed to my satisfaction.  The home looks beautiful...we could not be happier.

I solicited bids from several paint contractors and evaluated several before selecting Mike.  His pricing was very competitive versus several other contractors; but, I never observed where Mike cut corners.

I would definitely recommend MIke's Painting and will plan to use Mike again when we have painting needs.


"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+161

Recommended by91%of homeowners
Showing 1-10 of 33
Deck Staining questions, answered by experts

Your tool of choice ultimately comes down to personal preference. Many DIYers prefer applying stain with a lint-free rag, but others stick with a paint brush or a roller. Wipe the stain and work it into the wood, working with and against the grain. If you’re applying multiple coats, allow the stain to dry for around four hours between coats.

The best time to paint your deck is when temperatures are neither too cold (below 60 degrees) nor too hot (above 85 degrees). Always paint your deck when there’s no risk of rain. For fast-drying paint like acrylic or latex, ensure your deck can dry for at least four hours. Oil-based paints take longer to dry and may require 48 hours to completely cure.

The general consensus is that two coats of stain are required and since the cedar is siding, a third coat of sealant is always a good idea. This helps protect the wood and stain, so you won’t need to resand and restain for at least a decade. Each stain after the first will darken the wood, so be aware of that when choosing a colored stain.

Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don’t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.

Limewash and whitewash do not harm surfaces if you apply them correctly. Use on non-suitable surfaces can cause issues. For instance, applying limewash or whitewash to surfaces with existing sealants or incompatible materials may lead to poor adhesion or flaking. Also, harsh cleaning agents on limewashed or whitewashed surfaces can damage the finish. Proper preparation, application, and maintenance ensure that limewash and whitewash do not harm surfaces.

The Wallace, SC homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.