Get matched with top fencing pros in Willow Street, PA

Installing an aluminum fence typically takes one to three days, depending on the fence's size, layout complexity, and site conditions. Simple, straight-line installations may take just a day, while larger or more intricate designs with slopes or obstacles can extend the timeline. Professional contractors often complete the job faster than DIY installations.

Removing fence posts that are set in concrete is something you can't do by hand. You will need an excavator, a strong post-puller, or a jackhammer. If you plan on recycling the concrete base, you may be able to cut the post out with a jackhammer and then set the new post in the existing base. However, it's usually better to remove both the fence post and concrete together. Due to the weight of concrete, you will need a hydraulic removal tool.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

The ideal distance between fence posts depends on several factors, including the terrain, the purpose of the fence, and the material used. For different types of fences, here are some general guidelines:

• Wood and Metal Fences: Posts should be spaced between 5 and 8 feet apart.

• Vinyl Fences: Spacing can be between 6 and 8 feet.

• Chain-Link, Mesh, or Lattice Fences: Posts can be set anywhere from 4 to 25 feet apart, with 4-10 feet being common for chain-link.

• Wire Fences: Spacing can be up to 12 feet apart.