Get matched with top plumbers in Seven Fields, PA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Because plumbing repairs are wide-ranging in scope, job completion time may vary from a few hours or several days. Simple jobs such as clearing a clog, replacing a garbage disposal, or repairing a toilet will only take an hour or two. Large jobs that require digging up yards and checking pipes may take upward of one or two weeks.

You can use other ways to seal the space where your tub and the bathroom tile meet. Using sealant tape, epoxy sealer, and spray foam can be just as effective as caulking your bathtub. When using alternatives to caulk, the one that is best for you depends on your preferences. 

Sealant tape takes less time and effort to use, which is why some homeowners prefer it. Meanwhile, epoxy sealer creates a smooth and glossy finish that can complement your bathroom. Lastly, spray foam is waterproof and can act as insulation for your tub.

Only portable washers and dryers function without a full hookup, though in most cases, you will need the proper plumbing, electrical, and ventilation installation. However, many homes already have a washer and dryer hookup installed, in which case, all you need to do is attach your new appliances to the existing hookup. If you're not sure whether you have a functioning hookup, you can call a plumber to come and assess your setup for you.