Top-rated structural engineers.

Get matched with top structural engineers in Harrisonville, PA

There are 1 highly-rated local structural engineers.

Need a pro for your structural engineering project in Harrisonville, PA?

Select your specific project to find the pro for you.

Find Structural engineers in Harrisonville

Avatar for Groundworks

Groundworks

3819 N Susquehanna Trl
4.39(
57
)
Approved Pro

Groundworks

3819 N Susquehanna Trl
4.39(
57
)
Approved Pro
Customers say: Super punctual
38 local quotes requested
50 years of experience

Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)

"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."

Paul S on July 2025

Groundworks, formerly Baker's Waterproofing, has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs since 2009. Our top priority is providing high-quality home repair solutions and personalized service across central Pennsylvania. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or concrete. PA158514 (PA)

"The job went extremely well. Aaron Lenker and Corbin Gillichbauer performed the service and were professional and polite. I’m completely satisfied. Well done."

Paul S on July 2025


Avatar for Best Buy Waterproofing, LLC

Best Buy Waterproofing, LLC

8950 State Route 108
4.93(
43
)
Approved Pro

Best Buy Waterproofing, LLC

8950 State Route 108
4.93(
43
)
Approved Pro
Customers say: Quick response
Recommended by 97% of Angi customers
Recommended by 97% of HomeAdvisor customers
23 local quotes requested

With over 30 years experience in Basement Waterproofing and Mold Remediation services, Andrew A. Altman, Sr. Is a top rated veteran with a proven record beyond belief! In fact the certified, professional Staff has a combined experience of over 60 years. When you hire Best Buy Waterproofing, you are hiring the very best in the industry! They have the WIT attitude ( Whatever It Takes ) and customer satisfaction is their #1 priority as they are "Comitted To Excellence!" Best Buy Waterproofing is licensed, bonded, insured, and certified. They have earned the reputation of standing behind their incredible work and customer satisfaction. They offer free estimates and the very best financing available. They even have No payments & No Interest for 18 months! Best Buy Waterproofing stands behind their lifetime of the structure warranty on their systems. Also on all sump pump systems and their intelligent battery back ups! Best Buy is the ONLY company who offers this kind of warranty on those services as Strength is their Foundation! If you need a dry basement certificate, call us immediately. We are operational 24/7 365!

"Dan was highly professional and offered an excellent evaluation of my needs. He actually went into the crawl space to better understand my needs. A good neighbor and a person to know. Thank you."

Arsalan S on November 2024

With over 30 years experience in Basement Waterproofing and Mold Remediation services, Andrew A. Altman, Sr. Is a top rated veteran with a proven record beyond belief! In fact the certified, professional Staff has a combined experience of over 60 years. When you hire Best Buy Waterproofing, you are hiring the very best in the industry! They have the WIT attitude ( Whatever It Takes ) and customer satisfaction is their #1 priority as they are "Comitted To Excellence!" Best Buy Waterproofing is licensed, bonded, insured, and certified. They have earned the reputation of standing behind their incredible work and customer satisfaction. They offer free estimates and the very best financing available. They even have No payments & No Interest for 18 months! Best Buy Waterproofing stands behind their lifetime of the structure warranty on their systems. Also on all sump pump systems and their intelligent battery back ups! Best Buy is the ONLY company who offers this kind of warranty on those services as Strength is their Foundation! If you need a dry basement certificate, call us immediately. We are operational 24/7 365!

"Dan was highly professional and offered an excellent evaluation of my needs. He actually went into the crawl space to better understand my needs. A good neighbor and a person to know. Thank you."

Arsalan S on November 2024


Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
15 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025


GTS Consultants

211 Warren Street
No reviews yet

GTS Consultants

211 Warren Street
No reviews yet
28 years of experience

GTS Consultants has earned a reputation as a Minority Owned and Operated business since 1997. GTS Consultants are known for: -being highly regarded-with warm referrals -client responsiveness -professional surveyors -providing excellent communication -quick turnaround -competitive prices We have gained the respect and confidence of our clients by providing technical excellence and quality services throughout New York, New Jersey and Pennsylvania. Our corporate headquarters is located in the beautiful city of Newark, New Jersey. We look forward to hearing from and working with you soon.

GTS Consultants has earned a reputation as a Minority Owned and Operated business since 1997. GTS Consultants are known for: -being highly regarded-with warm referrals -client responsiveness -professional surveyors -providing excellent communication -quick turnaround -competitive prices We have gained the respect and confidence of our clients by providing technical excellence and quality services throughout New York, New Jersey and Pennsylvania. Our corporate headquarters is located in the beautiful city of Newark, New Jersey. We look forward to hearing from and working with you soon.



Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S



RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)

RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING


kieffer construction

246 Hudsondale St
1.00(
1
)

kieffer construction

246 Hudsondale St
1.00(
1
)
36 years of experience

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.


Metal Supermarkets

7120 Golden Ring Road
No reviews yet

Metal Supermarkets

7120 Golden Ring Road
No reviews yet
14 years of experience

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Showing 1-10 of 13
Structural Engineering questions, answered by experts

No, it’s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.

The National Association of Home Builders requires repair of any foundation crack of more than one quarter of an inch, although local regulations may vary. In general, any visible crack that is growing in size, allowing water through, or that you have just noticed, is a good reason to call a structural engineer. Cracks can be a sign of a sinking foundation, so an inspection is a good idea for your peace of mind.

A structural inspection report will include a detailed description of the structural engineer’s findings, applicable photographs, and recommendations to correct the issue. The contents of the report may depend on the scope of the inspection but might also include a time and cost estimate for recommended work to correct any structural problems found during the inspection. 

Yes, floor joists are essential structural components. They support the weight of floors and everything on them, transferring loads to the foundation and walls. Properly installed joists are necessary for maintaining strength, stability, and structural integrity.

Most structural engineers offer free quotes, regardless of the size of the job. For simple inspections when buying or selling a home, engineers typically charge a flat fee that may be based solely on your home’s foundation type and square footage. For larger projects, like new construction and major home renovations, an engineer will either perform an analysis of your project and site and provide you with a formal estimate, or they will do a more in-depth assessment and in-person site inspection before coming up with a per-hour or per-project cost estimate. In most cases, the estimate is free.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Harrisonville, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.