Get matched with top drain pipe installers in Farrell, PA

To keep your toilet from clogging, you can use less toilet paper. You can also use a liquid toilet plunger to break up any clogs and keep the toilet drain and pipes clear. When it comes to a clogged toilet, the best route is prevention by using less toilet paper and making sure the mechanisms are all working properly.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

• Snaking or rodding: $100–$250

• Hydrojetting: $350–$600

• Chemical treatments: $600–$1,000

• Repair or replacement: $1,000–$7,500

Liquid drain cleaners are harsh chemicals that can erode your pipes. To treat a slow drain or for preventative maintenance, pour hot water down the drain to break up gunk and help move it along. Make sure the water isn’t boiling hot (keep it under 140 degrees Fahrenheit) if you have plastic pipes. However, you’ll need to pull the clog out for bigger backups.