Get matched with top sump pump installation pros in Wasco, OR

To test for toilet leaks, use water coloring in the water tank and see if the water slips into the bowl from the tank. This test will indicate if there’s a problem with the flapper or refill tube. You can also put water coloring in the bowl of the toilet to see if there is a leak there. If there is, you should see the colored water on the outside of the toilet bowl or on the floor. 

There are several indicators that your washing machine’s drain pump is bad, including incomplete cycles, water not draining, lack of spinning, a foul odor when the machine is running, and a loud grinding or buzzing noise when the pump is trying to move water down the drain.

Sewer ejector pumps need to be cleaned at least once a year by a professional. You shouldn’t attempt to clean it yourself because it can release sewer gasses that are toxic to humans and can be fatal. But to keep the system as clean as possible between professional inspection and cleaning services, be sure to only flush human waste and toilet paper. Avoid flushing items that can clog the system, like paper towels, grease, oil, or menstruation products.

You shouldn’t shower while a sump pump isn’t working. Although household wastewater isn’t supposed to go into the sump pit, it’s best to wait to shower until your sump pump is running properly and able to move excess water out of the basement. If you need to shower when the sump pump isn’t working, aim for a short shower.