Get matched with top welders in Vida, OR

Q: What’s the difference between a welder and a metal fabricator?

• <div><p>Welding is the process of using extreme heat&mdash;and, sometimes, pressure&mdash;to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.</p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: Can metal roofing be cut with a circular saw?

• <div><p>While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The <a href="https://www.angi.com/articles/experts-discuss-metal-roof-paint-benefits-cost.htm">cost to paint a metal roof</a> again to avoid this damage is typically an additional <b>$0.50 to $1 per square foot</b>.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Vida, OR?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Vida, OR

*The Angi rating for Welding companies in Vida, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Vida, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on April 24, 2026

Reviewed in April 2026
Vlad and his team were amazing! Vkad was in constant contact with us through the whole process and got the project done in a quick and timely manner! I would recommend Aved Exterior for any and all projects! Vlad and his team are amazing and very professional!
Aved Exterior LLC
Request a quote
Reviewed in February 2025
The communication with both Taylor and Jeremy was great leading up to the install. They installed my wall oven quickly and professionally. Great guys. I would definitely hire them again for another project.
RRR HOME SERVICES LLC
Request a quote
Reviewed in July 2024
Great customer service, prompt, professional quality work.
Loose Deuce Septic & Tank Services LLC
Request a quote
Reviewed in September 2023
Very professional, polite and did a great job. They explained the entire process in great detail and answered all of our questions. Will recommend to everyone. Thanks for a job well done.
Advanced Garage Door INC.
Request a quote
Reviewed in August 2023
Jerid Strasheim and S4 Excavation are a top-notch professional operation. We had them regrade and install Geocells on our old gravel driveway. They explained the process and costs very clearly, arrived at the time promised, worked diligently and made sure we were fully satisfied with the job...
Jerid Strasheim LLC dba: S4 Excavation
Request a quote
Reviewed in August 2022
Dusty and his crew were great. They worked hard and did an excellent job. Arrived on time, worked hard and cleaned up when they were done. I highly recommend them.
Redhawk Excavation, LLC
Request a quote
Reviewed in June 2022
From the time I requested a consultation until they pulled away after their 3 days of work were complete, Dusty and his crew were everything you hope for when you work with a contractor. Full explanation of the work to be done, fair pricing, timely response, punctuality of the crew, respect for...
Redhawk Excavation LLC
Request a quote
Reviewed in February 2022
They were on time, courteous, and cleaned up after the job was done.
Gatlin's Gutters, LLC
Request a quote
Reviewed in January 2022
All areas treated at our vacation property, explained everything that was being done. Will start an ongoing quarterly service. Nice and Professional. Thank You!
Squish Pest Control LLP
Request a quote
Reviewed in May 2021
Professional. Enjoyable. And very pleased with their work. Very impressed.
Wolfpack Tree Service
Request a quote

Find Welders in Vida

Black Bear Fabrication and Build LLC

New to Angi

Serving Vida, OR and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

My name is Braden and I do welding and fabrication. I can do onsite repairs as well as small fabrication jobs I can build and then come install for you. Reach out for any questions you might have and I would be happy to talk with you!

4 neighbors recently requested a quote

Serving Vida, OR and surrounding areas

In business since 2019

Free estimates

Credit card accepted

"Will did the RV bumper repair on site."

Response time2 days

Response rate85%

Recommended by100%of homeowners

Request Quote

Iron Men Welding

New to Angi

Serving Vida, OR and surrounding areas

In business since 2020

Free estimates

Emergency services offered

Iron Men Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

Response time8 hrs

Response rate86%

Request Quote

Fusion Field Services, LLC

3.5(

)

Serving Vida, OR and surrounding areas

In business since 2015

Free estimates

Emergency services offered

We pride our company on reliability, great communication, integrity, and quality work. We strongly believe in giving our absolute best in all of our projects no matter how big or small. We are experts in our trade and will always keep you educated on your particular task or project. We look forward to earning your business!

Response time2 hrs

Request Quote

238 Machine Welded

New to Angi

Serving Vida, OR and surrounding areas

In business since 2000

Free estimates

Credit card accepted

At 238 Machine Welded , our company is based on the belief that our customers' needs are of the utmost importance. Our team is committed to meeting those needs. We welcome the opportunity to earn your trust and deliver you the best service. No job is too big or too small for our experienced team. Call today for a quote.

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Vida, OR and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

Olmos Construction & Remodeling

4.3(

)

Serving Vida, OR and surrounding areas

In business since 1999

Free estimates

Credit card accepted

"They can do pretty much anything. Fantastic work."

This is a laundry room was converted into a walk in shower travertine tile, Glass panels, shower ahead drop from ceiling.

+52

Recommended by83%of homeowners

Request Quote

HS Fabrication

New to Angi

Serving Vida, OR and surrounding areas

Free estimates

Small jobs welcome

Credit card accepted

From building custom handrails on-site, to fixing bicycles; I've had my hands in many builds and repairs working with Mild Steel, Carbon Steel, Stainless, and Titanium. TIG Welding, Oxy-Acetylene welding and brazing. Titanium Anodizing also available.

Request Quote

Iron & Earth

New to Angi

Serving Vida, OR and surrounding areas

In business since 2019

Free estimates

Over 15 years experience

Request Quote

Bowman Fabrication

New to Angi

Serving Vida, OR and surrounding areas

In business since 2024

Free estimates

Credit card accepted

With over 5 years of industry

Request Quote

Showing 1-10 of 15

Welding questions, answered by experts

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The cost to paint a metal roof again to avoid this damage is typically an additional $0.50 to $1 per square foot.

The Vida, OR homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Leah Lopez Cardenas
•
May 2, 2026May 2, 2026
How to Build and Install Metal Trusses in 4 Steps
Metal trusses give buildings like sheds and barns structure. While not a project for an average DIYer, here’s how to build metal trusses if you have roofing experience.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Steel Beam Installation
Find who to hire for steel beam installation. Learn who to call, what each pro does, and plan your project with confidence.
Jill Harness
•
Mar 6, 2026Mar 6, 2026
Soda Blasting vs. Sandblasting: Which Is Right for Your Project?
Both soda blasting and sandblasting use agitating media to clean or prepare surfaces for coating. This guide explains their applications and differences.