"I spoke with Randy over the phone and he came out the next day to give me a quote. The project was challenging as there were french drains and irrigation pipes to avoid while providing sufficient support for large gates. The gates over the grass had to open more than 90 degrees to clear the grass edges for edging. Randy sketched drawings and I accepted his quote. He provided CAD drawings the next day. His fabricator, James, came out later to double check some measurements and review the site to assure everything would be perfect. He and his helper installed the fence and gates about four weeks later. It was delayed a week due to rain. It came out beautifully. It not only looks great, but it functions even better than we had hoped. James spent hours on the installation making sure it was perfect. The recent rains made the area muddy, but he and his helper did a great job cleaning up. We are very pleased."
"It went great. Alex Knows what he is doing and is very professional. I will hire again when I need Mobil welding services. He had a challenging task of fixing a previous" bad hires" work."
"Excellent experience with Braden from Black Bear Fabrication. We needed a window well grate modified for a new vent hood, so the grate would fit back in place. He was quick to respond, great communication prior to beginning the job. On the day he arrived exactly on time and ready to go. He was completely prepared, took a few measurements, and got to work. His workmanship is outstanding, he did a PERFECT job for us. I will recommend him to anyone that needs mobile welding and fabrication. He is a gentleman, and a high-level craftsman. Thank you Braden!"
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
"Hi everyone I got my roof redone by this company and they did an amazing job thanks to Michael and Adam it was done very professionally thank you for your help"
"They are both friendly, professional, and on time. Grady and Blake break the mold when it comes to dealing with a contractor. They show up when they say they will, communicate thoroughly throughout the process and do the job right."
"The project was quoted promptly and initial communication was pretty good. This was the lowest of 6 bids and price and schedule were the deciding factors in our decision to move forward. After scheduling, I emailed to ask who would be calling 811 to mark the utility lines. Reggie confirmed that he would, but no utility people showed up going into the weekend. We called Reggie and told him this and told him that the project could not start until the lines were marked. He confirmed and mentioned that the utility people should be there since the request was submitted on Friday. We said they needed 2 business days so the earliest they would be there was Monday. We pushed the job back one day since the utility people did not show on Monday. The team showed up on Tuesday and dug and installed the fence posts and then left to pick up the remaining materials for the next day. On day two, the team showed up in the morning and Reggie discovered that they had placed the posts for vertical fencing and not horizontal fencing (needed to be closer together to work with the slats) so they dug up the posts and re-did them. They also installed the 20' of 3 ft tall fence. When I returned from work, I noticed that the 3' tall fence posts had all been cut down to height and not left tall for the 6' gate that was supposed to be installed. We called Reggie and let him know and he said they would re-do those posts. The next day they got to work installing the horizontal boards on the 6' fencing. I video called with Reggie while I was at work (my partner facilitated) to confirm which side of the fence would get the "nice side". We agreed that it would all face inwards. Later that day my partner looked outside and noticed that the crew was installing the boards on the outside of the fence and went out to talk to them and had them switch it back to what we had talked about with Reggie. The next day they continued the fencing without any major hiccups and the last day the box gates were built and installed. We reviewed the work with Reggie acknowledging that everything was done correctly and looked nice. We mentioned the confusion (including having to re-do work after we asked questions) and lack of communication and he acknowledged the challenges and pointed out that it was done in the end. After the project was completed, I emailed, texted and called to ask for a receipt and did not receive one until my partner called multiple times. Reggie did show up to make a minor repair to a gate latch about 1 month later. Overall, the workmanship is good, but the communication was not very good."
"My experience turned out fine. They seemed very thorough and they were very low key. There was no pressure to do any additional services. I thought they did a good job."
Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.
Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.
Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.
Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.
The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.
Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.
The Sheridan, OR homeowners’ guide to welding services
From average costs to expert advice, get all the answers you need to get your job done.
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.
