Rick's Custom Fencing & Decking was founded in 1980 by Rick Stanley. Since that time, we have grown to be one of the largest retailers of fencing and decking in the Pacific Northwest. Rick's Fencing now has five locations throughout Oregon and Washington.\n\nAt Rick's we take pride in the integrity of who we are, the high quality of those we employ and the dedication of all who serve our customers effectively.
"We happened upon Shawn replacing a deck for someone in our neighborhood. He came and looked at our deck that needed replaced. He drew up a professional estimate with pictures of the deck and back stairs he would build for for us and we hired him. He listened to our wants and needs that were fulfilled. Shawn, Justin and Wyatt were very kind, personable and very professional. I highly recommend Shawn Miner for all your building/project needs. We couldn't have found anybody better. Thank you Shawn 😊"
"Here?s a condensed version under 999 characters while keeping it natural and personal:
---
Vanguard Construction did an amazing job transforming my garage into a high-tech office and workshop. It started as an old, uninsulated space with outdated paneling, but they completely gutted, insulated, and upgraded everything. They brought in an electrician to install a dedicated subpanel, 12 lights, 18 outlets, and a 240V outlet, ensuring I had power where I needed it. They also installed security cameras, motion lights, and outdoor outlets.
They framed and soundproofed a wall to separate my laundry area, added French double doors, and finished with carpet tile. Their transparency was outstanding?they broke down every cost, kept me informed, and even refunded me $800 from the material budget.
They put time and care into every detail, and I?ll be hiring them again soon. If you want quality work from an honest, detail-oriented team, hire this company."
Oregon Coast Blinds is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.
\n
J & S Huffman Construction Co., is a quality general contractor. With a high level of craftsmanship we tackle every job like it was for our own home. We keep communication going throughout the whole construction process so that we are sure that your expectations are met and exceeded. We keep to the design plans of our customers because it is your home and it should be the way you want it. Being in business for 20 plus years has given us the knowledge of our industry and the experience to undertake the projects you need done. Call J & S Huffman Construction today for all your home improvement needs.
About Me\n\nI’m a dependable, hardworking, and detail-oriented person who takes pride in creating clean, comfortable, and welcoming spaces. My background in teaching, childcare, outdoor education, and working independently has taught me to be organized, responsible, trustworthy, and attentive to the little things.\n\nWhen you choose me as your cleaner, you can expect more than just a basic clean. I treat every home with care and respect, pay close attention to detail, and strive to leave your space feeling fresh, organized, and cared for. I understand that inviting someone into your home requires trust, and I take that responsibility seriously. My goal is to make your life easier and give you the peace of mind of coming home to a clean and comfortable space.
Berper Construction LLC in Eugene, OR: Your premier choice for carpentry, specializing in interior work, woodwork, and shop projects. We also excel in siding and decking, interior painting, and reliable handyman services. Elevate your space with our craftsmanship.\n\nWe serve in Eugene, OR, Junction OR; Cottage Grove OR; Creswell OR; Veneta OR; Harrisburg OR; and the surrounding areas.\n\nConstruction services, Local construction company, Commercial Construction Contractor, Construction Specialist, General Construction\nCarpentry Services, Siding Services, Handyman Maintenance Services, Deck Services, Janitorial Service, Interior Painting Service\n\nFor more information visit our website: https://constructioncompany-eugeneor.com/
"I have had Joe Arnold working on my property now for over 15 years and have marveled in how skilled and efficient he is in every aspect of Landscape, carpentry, stone work, and overall remodeling. Joe is a delight to have on any project and his extremely high integrity gives me confidence in recommending him as an excellent talented craftsman!"
"Chris was referred to me from a friend who he done work for. We were under tight time frame to get facia repaired from Home inspection to close sale on the house. Chris went to the house sent pictures of work needed to be done and provided a quote that evening that was lower than 2 others. Did the work on Labor day ,9/4/23 in one day and did the job correctly, replacing sheet of plywood and new roofing plus facia, trim and painting. Sent me pictures of final work. We live on Eugene, OR and rental was in North Bend. Chris was great to work with, would highly recommend him."
"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
While framing a basement is not as difficult as finishing a basement, it's something you should typically leave to the pros. That’s because if something is installed correctly, it will affect your entire basement. However, you can take care of some of the smaller tasks, like filling holes or putting up some insulation.
Yes, you will need a jack for a rim joist replacement. To prevent sagging and facilitate the removal of load-bearing wood, you’ll need to relieve the pressure from this joint before beginning work.
Due to hydraulics and other specialized equipment, a sill plate and rim joist replacement are not typically a DIY project. Hiring a professional structural engineer and experienced contractors is the best approach to replacing rotted sill plates and rim joists.
If the bowing basement wall is less than 2 inches, steel or carbon fiber straps are the best solution. For bowing that is more than 2 inches, wall anchors are the most effective. A contractor can help you decide the best method of repair for your home's foundation and also address the root cause of the trouble.
When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project.
You may need a permit to install your window seat. Even though it's an indoor modification, some municipalities require permits for any built-ins added to homes. Check with your carpenter or, if you're DIY-ing, do some research on your city's requirements.
The Dunes City, OR homeowners’ guide to carpentry services
From average costs to expert advice, get all the answers you need to get your job done.
Add a wow factor to your home with a chandelier. Chandelier installation costs depend on style, location, and labor, so learn what you can expect to budget.
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
