Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Drain, OR

Q: Is it cheaper to build a pizza oven?

• <div><p>Whether or not it&rsquo;s cheaper to build a pizza oven depends largely on what style you opt for and which tools and materials you already have. For example, having a surplus of leftover fire bricks from another DIY project will reduce the amount you need to build a new pizza oven and cut costs to boot. On the flip side, if you don&rsquo;t have any of the required materials, buying a pre-made option will be cheaper and require far less work to set up&mdash;between just <b>$300 and $1,000</b> for the best versions.</p></div>

Q: How do you make stainless steel shine?

• <div><p>To restore an appliance&rsquo;s shine, clean the surfaces using a natural cleaning solution, and then use a mineral oil or olive oil and a soft microfiber rag to polish stainless steel surfaces in the direction of the graining. A little goes a long way, so dip the cloth in a small amount of oil. If you have any excess, continue with a dry part of the microfiber cloth to soak up any remnants.</p></div>

Q: How many metal sheets will I need?

• <div><p>The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.</p></div>

Q: What is the best tool to cut metal ducts?

• <div><p>The best tool for cutting metal ducts depends on the duct's shape and thickness. For round ducts, a duct cutter provides accurate, clean cuts. Reciprocating saws equipped with metal-cutting blades are versatile and suitable for both round and rectangular ducts. They offer speed and precision, especially for thicker metal. </p><p>Tin snips are handy for intricate cuts or smaller ducts. However, an angle grinder with a metal-cutting wheel is powerful and efficient for large or thick metal ducts. </p></div>

Q: How long does metal fabrication take?

• <div><p>Most projects take 1-4 weeks, depending on material sourcing, design intricacy, and required finishing treatments like powder coating or galvanization.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Drain, OR?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Drain, OR

*The Angi rating for Metal Fabrication And Restoration companies in Drain, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Drain, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on November 14, 2025

Reviewed in August 2025
I worked with Missi and the crew at Victoria Picket Restoration on a project for my parents, and I was very impressed. Their communication was excellent from start to finish. They were always happy to answer questions and had some great suggestions for us. We knew what to expect every step of...
Victoria Picket Restoration
Request a quote
Reviewed in October 2023
Absolutely the worst experience I have had with a Painter. Two whirl wind days and they threw paint onto a house that was not properly prepped for painting. Applying paint to an exterior surface with old paint that is loose, blistered, crazed and in need of removal so the new paint being applied...
Jeff Hale Painting
Request a quote
Reviewed in September 2023
Juan Chavez and his father came to my home and helped design metal railings for three locations. During the process they demonstrated their knowledge of what was needed for the project to meet all of my needs. They fabricated the railings in accordance with the plan and installed them and...
Ornamental Steel Fabrication
Request a quote
Reviewed in August 2019
Mike did an excellent job in working with a unit that parts are no longer available. He fabricated a replacement part and the unit is as good as new. Due to an unforeseen problem, had to make a return trip and didn't charge extra over the estimate. Would highly recommend Mike to anyone who needs...
Mobile Tech Fitness Repair
Request a quote
Reviewed in June 2014
nice guys, fairly efficient & careful, didn't quite get everything into van but we were able to take care of the rest
A+ Always Moving, Inc.
Request a quote
Reviewed in June 2013
Well, Link's Custom Sheet Metal was unprofessional. They were late, uneducated and it gets worse. They're disrespectful to me. They didn't acknowledge my knowledge of what they were doing. How bad can I make it? It was horrible and I was stuck with them if they'll be having the inspection three...
Link's Heating & Air Conditioning
Request a quote
Reviewed in January 2012
They diagnosed dehydration and X-rayed to discover a tumor around his kidney. They treated him with intravenous fluids and vitamins to restore his appetite, and steroids to reduce the tumor. In a few days, he was doing much better, was eating normally and is regaining lost weight. They called...
VCA Five Corners Animal Hospital
Request a quote
Reviewed in October 2011
Showed up the same day I called, too measurements and was in contact the next day with bid and timeline. Explained about special ordering product, etc, and how woods need to rest in the house for a week plus to acclimate to the house. Came on the day sceduled, worked for 2 days, came back...
J & J Hardwood Floors
Request a quote
Reviewed in April 2008
I had a little trouble getting in touch with Rich, we played phone tag for almost a week before finally getting in contact. (He would call once a day around noon and when I didn't answer my cell, he'd leave a message, but wouldn't answer his phone for the rest of the day.) Once he came, he gave...
All Year Moss Control
Request a quote

Get matched with top metal fabricators and restorers in Drain, OR

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Drain, OR?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Drain, OR

Find Metal fabricators and restorers in Drain

Independent Cylinder Head

Independent Cylinder Head

White Stagg LLC

White Stagg LLC

Iron Horse Garage

Iron Horse Garage

Those Guys Fabrication

Those Guys Fabrication

James Christy Construction

James Christy Construction

Rogue Gear Works Fabrication LLC

Rogue Gear Works Fabrication LLC

Homers Excavation

Homers Excavation

E Enterprises JDCV

E Enterprises JDCV

EJ's Shine Time

EJ's Shine Time

Advanced Automotive

Advanced Automotive

The Drain, OR homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Drain? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Drain Metal fabrication and restoration services on Angi who specialize in any of these tasks

Find Pros for other jobs in DrainIf your Metal fabrication and restoration services job is complete, use Angi to find quality Pros in Drain for any number of jobs.