Top-rated welders.

Best welders near Warr Acres, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Warr Acres, OK?

Select your specific project to find the pro for you.

TRUSTED BY WARR ACRES, OK HOMEOWNERS

  • Average homeowner rating star icon4.9
    Average homeowner rating
  • Verified reviews icon13
    Verified welding services reviews

Top-Rated Welders in Warr Acres - Updated Nov 2026

Avatar for Outdoors Construction
Outdoors Construction
5.0(
9
)
Steel Beams (Structural) - Install

Serving Warr Acres, OK and surrounding areas

Approved

In business since 2019

Free estimates

Warranties offered

"Jacob, the owner was very good with his communication about the project. He kept me informed on any issues. Any time we were to meet he made sure he was there and if he was running late would let me know. He did a large fencing job for me, 220 of 8 cedar with cap and trim. Fence lines were heavily treed so post holes were difficult, but they worked through it and did a great job. I bid three companies and theirs was the best price."
My Projects
My Projects
My Projects
My Projects
My Projects

+21

Response time2 days
3 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for Sharp Welding
Sharp Welding
New to Angi
Metal Structure or Object - Create CustomMetal Structure or Object - Weld or CutWrought Iron Fence - Repair or Weld

Serving Warr Acres, OK and surrounding areas

Approved

Emergency services offered

Warranties offered

Small jobs welcome

I have 30+ years experience in welding and fabrication. I have a very strong work ethic and stay goal oriented to complete the task. I am able to work on site. I am able to manage time and plan the job so that it is completed in the most efficient and productive manner. \n

Response time10 mins
Response rate100%
Avatar for Bryce Case Construction
Bryce Case Construction
5.0(
2
)
Metal Stairs and Railings - RepairMetal Structure or Object - Create CustomMetal Structure or Object - Weld or Cut+1 more

Serving Warr Acres, OK and surrounding areas

Approved

In business since 2015

Free estimates

Emergency services offered

"I called him with a need for a gate to be replaced on a property I was about to move into. He was on his way out of town, but did the job immediately after returning. He did an excellent job. The gate was not what I envisioned, but was much better. I would definitely use him again."
Response time2 hrs
Recommended by100%of homeowners
Avatar for Grauer Fabricators
Grauer Fabricators
New to Angi
Metal Structure or Object - Weld or Cut

Serving Warr Acres, OK and surrounding areas

Approved

I’m a certified stick and MIG welder with years of hands-on experience in welding and metal fabrication. I specialize in reliable, high-quality work for both residential and commercial projects, including gates, fences, handrails, carports. Every job is done with precision, durability, and attention to detail.\n\nI take pride in clear communication and dependable service. Whether you need a repair, or a custom design, I’ll work with you to bring your ideas to life—and make sure the results are built to last.

Response time10 mins
Response rate100%
...
Showing 1-10 of 212
Welding FAQs, answered by experts

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Yes, you can cut up a box spring., but you’ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. 

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. 

The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:

  • Magnesium alloy: $7–$16 per pound

  • Low-carbon steel: $11–$12 per pound

  • Stainless steel: $13–$15 per pound

  • Copper/brass: $24–$29 per pound

  • Cast iron: $38–$79 per pound

  • Titanium: $60–$85 per pound

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

The Warr Acres, OK homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.