Get matched with top garbage collectors in Tipton, OK

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

Continuous feed garbage disposals are the favorite model for many homeowners for a reason. As opposed to batch feed models, add food scraps to the drain whenever the disposal is running. This variety is also typically less expensive, more convenient, and easier to clean.

Garbage disposals fit the drains of nearly every sink out there due to universal drain hole sizes of 3 1/2 to 4 inches, but the same isn’t true for the housing underneath the sink. You need plenty of room to fit a garbage disposal under there, so measure the space ahead of time and use those dimensions when shopping for a new model. If you’re replacing an existing model, get one in that size.

Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.