Get matched with top electricians in New Cordell, OK

Smart meters send the readings over a wireless wide area network (WAN) to the power company. This network allows sending small amounts of data slowly over long distances, which is perfect for smart meter readings that occur monthly. If you would prefer a smart meter, contact your power company and consider springing for the cost of replacing your electric meter.

While circuit breakers are designed to be reset after tripping, there isn't a strict countdown to when they will fail. The primary danger lies in a breaker tripping multiple times in a short period without allowing the components to cool down. Theoretically, a standard breaker might handle around 50 trips caused by simple overloading. However, this number can be much lower in practice. For instance, a high-current fault could damage a breaker to the point that it needs replacement after only two resets. Repeatedly resetting a breaker that trips frequently exacerbates the underlying problem by causing the electrical components, wires, and the breaker itself to overheat. This can lead to permanent damage, cause the breaker to trip unnecessarily in the future, and increase the risk of an electrical fire. If a breaker trips every few minutes, you should leave it in the 'off' position and call a qualified electrician for an inspection.

The color code for the common sprinkler wire is white, and then you can assign the remaining color codes to the rest of the wires for different sprinkler zones. For example, you could use red for the first zone, then blue for the second, and so on.

Color-coding helps you keep track of which wires go to specific zones so that you or a pro can address any issues or repairs quickly. Check your local electrical code for any requirements regarding sprinkler wire colors.

Yes, most electric and automatic gates can be opened manually. They are equipped with a manual override or release mechanism that detaches the motor from the gate, allowing it to be moved by hand. This feature is essential during power outages or other emergencies.

To activate the manual override, you will typically need a specific key or tool. In some cases, you may also need a screwdriver to remove a cover to access the release mechanism. The use of a key is a common security measure to prevent unauthorized individuals from manually opening the gate.

Because every model is different, it is highly recommended to consult your gate's user manual to familiarize yourself with the specific procedure before you need to use it. Keep any necessary keys or tools in an accessible location. Be aware that automatic gates can be very heavy, so opening and closing them manually may be difficult.

In North America, electric gates are also subject to the UL 325 Standard for Safety, which includes provisions to allow emergency responders to access the property.