Get matched with top septic tank pros in Hooker, OK

Several signs can indicate a faulty well pump pressure switch. These include your pump running continuously, the pump not turning on at all, or a sudden and complete loss of water. Other symptoms are weak water pressure or an erratic, unpredictable water flow from your fixtures. If you notice these issues, the pressure switch may be the cause. Testing the switch can help diagnose the problem. A faulty switch will likely need to be repaired or replaced. If the issue is more complex, it's best to consult a professional well technician to ensure your water supply is restored correctly.

Your septic tank naturally contains the good bacteria it needs, so you typically don't have to add more as the system produces them on its own. However, if you wish to replenish the bacteria, you can use natural methods. For example, you can add three rotten tomatoes to your garbage disposal or flush 1/4 ounce of active yeast down the toilet every three months. While store-bought septic enzymes and chemicals are available, many additives are unnecessary and may even harm your system. The most effective way to maintain a healthy bacterial balance is to avoid using chemical drain cleaners, which can kill the beneficial bacteria in your tank.

Adding a thin layer of dirt over a septic drain field is fine, especially if soil erosion has occurred. However, adding too much dirt can compact the soil, reducing the drain field’s ability to absorb and filter wastewater properly. Avoid using heavy clay soil, as it can prevent proper drainage. Instead, use a light layer of topsoil and plant grass to help with soil stability.

Expect to take at least a day to drill your own well by hand. For a 500-foot well, this could take even longer, depending on the makeup of the soil and the terrain you are drilling through. Other factors include your physical strength and overall fitness level and the weather conditions you’re working in.