Get matched with top buffing and polishing pros in Hooker, OK

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

In most cases, chipped or cracked granite can be salvaged, but it depends on the size and scope of the damage. For example, a pro can smooth out small chips on the edge with polish pads or an angle grinder, but a crack that runs through the stone's surface has little-to-no chance of being fixed easily.

You can’t change the color of the stone, but you can update granite countertops without replacing them by painting them. Because granite is a porous material, you’ll want to seal them first before painting them so that the paint doesn’t hurt the surface. This is important because you don’t want to devalue your counters by damaging the original surface; even if you don’t like the color now, you or a new homeowner may want to remove the paint someday and return them to their original color. You can also cover them with 

Avoid using abrasive cleansing powders on natural stone, as these products could damage the porous material. Using bleach is also a poor idea because of the porosity of the stone. Avoid using a scrub brush with metal bristles, as they could scratch the stone. If you know who manufactured your stone or who installed the fireplace, you may want to contact that entity for any advice on cleaning it safely.