Get matched with top countertop and backsplash pros in Gore, OK

Granite countertops cost an average of $3,250 compared to $2,250 for tile countertops. Granite is also harder to DIY than tile, given its weight and bulk, which increases the overall labor cost of installation. Over time, both types of countertops may need sealing to remain resistant to water, heat, and other common kitchen elements.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Here are some things to avoid to help protect, maintain, and care for laminate countertops. Do not put hot pans or appliances directly onto the countertops because they can scorch the surface. Always use trivets and hot pads. Avoid using harsh, abrasive cleaning products and steel wool. Opt for hot, soapy water and a soft microfiber cloth instead.