Get matched with top carpenters in Fairview, OK
Top-rated carpenters.

Need a pro for your carpentry project in Fairview, OK?

Select your specific project to find the pro for you.

Find Carpenters in Fairview

Avatar for Dr handy
Dr handy
New to Angi

Serving Fairview, OK and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

Proudly serving our community with dependable, honest, and high-quality workmanship. Whether it’s a quick repair or a major project, we treat your home with the same care and attention to detail as if it were our own.

Pulpit
Alva church
Alva church
Alva church
Alva church

+4

Avatar for Fineline Construction and Handyman Services
Fineline Construction and Handyman Services
4.0(
440
)

Serving Fairview, OK and surrounding areas

In business since 1987

Free estimates

Emergency services offered

"Two guys came and took care of a small project in 30 minutes to an hour. He also said, "What else can I do for you?" I asked him a couple of questions and he said, "Oh, we can do that." So he did some other things that were small, but needed to be done with. He did those and then he said, "Well what else can we do for you?" That was all I could think of. There were two guys. I thought it would be one guy for two hours, but it was two guys that were there a little over an hour. I got done what needed to be done, so I was very pleased. He said, "If you need anything call us back." I didn't have to pay anything more. I had a shelf that was falling in the garage. They did the brace that had broken. So they had to take a lot of heavy boxes off and they replaced that brace and then they also did some other braces to support it. That was actually what I called them out for and they took care of that. The ladder to the garage came down on top of a board that my husband had put there to raise the car up so that it would clear this kerb he had put in. He put in a kerb so that you would know where to stop the car. Then the car couldn't clear the kerb, so he put a board in to raise the car up to clear the kerb. That meant the ladder that came down out of the attic hit that board. My grandson had questioned the strength of the ladder. I had them take out the ladder. It's only good for 200 lbs. That is why a heavy guy might have an issue with it. It wouldn't fit right because of that board. The guy sad, "Well your ladder is fine," and they cut a little square out of the board so that the ladder could go all the way down."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+31

Recommended by83%of homeowners
Avatar for Air Roofing & Contracting LLC
Air Roofing & Contracting LLC
4.7(
220
)

Serving Fairview, OK and surrounding areas

In business since 2006

Free estimates

Emergency services offered

"David spent a lot of time going over my roof situation and explained in detail many things that I did not know. This was for the initial roof assessment that I purchased through Angie's List. He was able to include several other items related to roofing surfaces that I needed done in the estimate that I wound up accepting. He was able to get a crew out quickly to work on the repairs we agreed on. I would use this company again."
Additional Photos
Additional Photos
Additional Photos
Shingles installed on this project are Class 4 impact resistant shingles. This shingles typically will save the average homeowner 15% to as much as 50% off there homeowners insurance.
Shingles installed on this project are 25yr shingles commonly referred to as 3-tab shingles

+5

Recommended by94%of homeowners
Avatar for Davis Powerwashing - Home  Facebook
Davis Powerwashing - Home Facebook
5.0(
7
)

Serving Fairview, OK and surrounding areas

In business since 2017

Free estimates

Offers commercial services

We are a locally owned and operated company. We value honesty and integrity in all aspects of our business. We offer a variety of home improvement services that are customized to each individual project. We pride ourselves on the quality of our work, as well as our commitment to outstanding results. We look forward to building lasting relationships with our clients and guarantee your satisfaction!

Driveway
Vinyl Siding
Vinyl Siding
Driveway
Retaining Wall

+10

Response time3 days
Recommended by50%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Fairview, OK and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)

Serving Fairview, OK and surrounding areas

In business since 2006

Credit card accepted

"This service was exactly what I was looking for.  I wasn't confident about choosing the new look for my living room.  I wasn't sure what my "style" was, and what would look good together.  I needed a consultant to let me know if the items I was considering would look good together.  Amanda called me and we talked about what I liked/didnt like.  She had me post pictures from Pinterest and Houzz of rooms I liked.  From that she was able to tell me what my style was.  She noticed things I never realized before.  For example I apparently picked the exact style couch in every picture I posted.  As I found furniture I liked I would send her photos and she would let me know if she thought they would go good together.  For example she recomended a different coffee table - i needed one that was more substantial to balance the size of the sofa.  She also helped me fine-tune the paint colors for my walls - I thought this was the hardest part of designing the room, but I love the results. 
I was basically looking for someone to guide my choices, but they will also modify their level of service depending on what you need (cost varies depending on service needed).
I would positively use them again!!
"
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
Avatar for Outdoor Creations Roofing
Outdoor Creations Roofing
4.7(
25
)

Serving Fairview, OK and surrounding areas

In business since 2012

Free estimates

Credit card accepted

"Very well. I have a 3 bedroom, one story, low pitched roof home. Jake explained everything that would take place. The crew was very good and worked so hard to get done in under 2 days. Jake even contacted the insurance company and helped me to communicate with them in order to get my claim approved."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+3

Recommended by95%of homeowners
Avatar for Choice Home Warranty
Choice Home Warranty
4.0(
5,676
)

Serving Fairview, OK and surrounding areas

In business since 2008

Emergency services offered

Credit card accepted

"Tech arrived within time frame agreed upon. He checked out thermostat. Found it defective and had to order replacement. Has not yet finished job, but i expect to hear from him as soon as he acquires replacement to schedule installation."
Recommended by82%of homeowners
...
Showing 1-10 of 63
Carpentry questions, answered by experts

New builds, remodels, and additions often necessitate professional framing expertise.

Framing with metal studs can be significantly faster than using wooden studs, provided you have some experience working with the material. While you can use virtually instant pneumatic nailers with wood, metal requires installing screws. However, because metal is lighter, straighter, usually comes cut-to-length, and doesn't require sorting for the best pieces, you can save significant time using metal instead of wood.

Homeowners can increase the usefulness of their garage space in other ways, and one option is to extend the length of the garage by making it deeper. The process is similar to traditional garage extensions, but the end product is a garage with a different layout rather than additional parking spaces. 

Bump-out additions can extend anywhere from 2 to 15 feet from an existing room. The right size will depend on how you plan to use the new space. For a cantilever bump-out, which doesn't require additional foundation support, the limit is typically 24 inches (2 feet). If a footing and foundation are part of the project, a bump-out can be much larger, even encompassing a whole room. It's also important to remember that many residential properties have limits on the total house size relative to the lot size.

Framing most homes takes anywhere between five and eight weeks to complete. You’ll need to account for inclement weather conditions, material shipment times, the number of crew members, and the weight of your materials. If the weather is too hot, wet, or cold for the installation, this process could take closer to eight weeks.

The Fairview, OK homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.