Best floor polishers near Bokchito, OK

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Steam mops can be a better option than traditional mops because the steam can lift stubborn dirt from floors without using chemicals, and it also kills bacteria and dust mites. However, steam mops have drawbacks: they are more expensive, require an electrical outlet, and are not suitable for all flooring types, such as laminate or hardwood, which can be damaged by the steam.

Regular mopping can also sanitize floors effectively when done with the right cleaning products and techniques, though it may require more effort. The main advantage of a traditional mop is its versatility, as it can be used on any type of flooring. Ultimately, the best choice depends on your floor type, budget, and cleaning preferences.

Wood floors should be polished every two to four months to maintain a shine and to keep them protected from daily wear and tear. More frequent maintenance includes dry mopping the floors daily and cleaning spills immediately, using a spray mop and cleaner weekly to remove any built up dirt or grime, and sanding and refinishing the floors every three to five years.