Top-rated contractors.

Get matched with top contractors in Ardmore, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Ardmore, OK?

Select your specific project to find the pro for you.

Find Contractors in Ardmore

Buckin' A Welding
0.8(
2
)
Major Home Repairs (General Contractor)

Serving Ardmore, OK and surrounding areas

Approved

Recently relocated to Grayson County. We've been serving Texas and other states for 13 years in building ground up commercial buildings, additions, and renovations. We specialize in structural steel fabrication and erection, custom steel fabrication, gates and entryways. We were designing and building Barndominiums before people knew what they were. We do the job right or not at all. We guarantee our work, and we often takeover failing or abandoned projects and get the project completed. We've built and have tore down and rebuilt many very large churches. We've done a lot of historical renovations and dealt woth the historical regulations, etc. We've done a lot of work at The Grandscape in The Colony Tx. We worked on The Dallas Morning News, The Statler Hotel as well as many other hotels, high end retail and entertainment districts. \n We have worked and a General contractor holding responsibility for a project from conception to planning and development, through completion.

Avatar for lone star green homes
lone star green homes
New to Angi
Major Home Repairs (General Contractor)

Serving Ardmore, OK and surrounding areas

Approved

Free estimates

Emergency services offered

Credit card accepted

Our company dedicated to delivering exceptional craftsmanship, transparent communication, and outstanding customer service. With years of experience in custom home construction, renovations, and remodeling, we bring the same attention to detail to every project—whether it's a single-room remodel or a complete home transformation.\nOur expertise includes kitchen remodeling, luxury bathroom renovations, room additions, flooring, cabinetry, painting, trim work, custom millwork, and high-end finishes. We specialize in creating modern, functional spaces while maintaining the highest standards of quality and craftsmanship.\nWe believe every homeowner deserves a contractor they can trust. We provide detailed estimates, maintain open communication throughout the project, and treat every home with the same care and respect as if it were our own. Our goal is simple: deliver beautiful results, complete projects on schedule, and build lasting relationships through honesty, quality, and reliability.

Avatar for Fineline Construction and Handyman Services
Fineline Construction and Handyman Services
4.0(
440
)
Major Home Repairs (General Contractor)

Serving Ardmore, OK and surrounding areas

In business since 1987

Free estimates

Emergency services offered

"Two guys came and took care of a small project in 30 minutes to an hour. He also said, "What else can I do for you?" I asked him a couple of questions and he said, "Oh, we can do that." So he did some other things that were small, but needed to be done with. He did those and then he said, "Well what else can we do for you?" That was all I could think of. There were two guys. I thought it would be one guy for two hours, but it was two guys that were there a little over an hour. I got done what needed to be done, so I was very pleased. He said, "If you need anything call us back." I didn't have to pay anything more. I had a shelf that was falling in the garage. They did the brace that had broken. So they had to take a lot of heavy boxes off and they replaced that brace and then they also did some other braces to support it. That was actually what I called them out for and they took care of that. The ladder to the garage came down on top of a board that my husband had put there to raise the car up so that it would clear this kerb he had put in. He put in a kerb so that you would know where to stop the car. Then the car couldn't clear the kerb, so he put a board in to raise the car up to clear the kerb. That meant the ladder that came down out of the attic hit that board. My grandson had questioned the strength of the ladder. I had them take out the ladder. It's only good for 200 lbs. That is why a heavy guy might have an issue with it. It wouldn't fit right because of that board. The guy sad, "Well your ladder is fine," and they cut a little square out of the board so that the ladder could go all the way down."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+31

Recommended by83%of homeowners
Avatar for The Basement Kings
The Basement Kings
4.8(
16
)
Major Home Repairs (General Contractor)

Serving Ardmore, OK and surrounding areas

In business since 2004

Emergency services offered

Credit card accepted

"I have had over 30 contractors at my home as it has been basically rebuilt.  This company has been the most professional i have dealt with.  Showed up on time, communicated progress, cleaned up at the end of each day COMPLETELY, came with all necessary tools and supplies.
Along the width of the house, all of the walls were removed from the floor to aprox 2 feet.  Lower portion of studs and base plates removed, walls sealed with amazing product, studs, base plate and walls replaced (not the sheetrock).  All lower level floors sealed.
We have had over 5" of rain in the last 24 hours.  This is the first time since i have owned this house that the floors have not flooded when we have saturated soil and heavy rain. 
Incredible product, excellent company.  i highly recommend both.
"
Recommended by92%of homeowners
...
Showing 1-10 of 56
Unfinished Carpentry questions, answered by experts

It’s best to use two screws to secure deck boards into every joist. Securing the boards to every joist makes the deck more structurally sound, while using two screws on the outer sides of the boards can help prevent warping and cupping.

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. 

Yes, a 2x6 should hold a porch swing and safely support the load. A smaller joist runs the risk of it not offering enough support for the swing. If you have a joist smaller than 2x6, add additional bolstering support.

For a professional carpenter, installing a window seat can take anywhere from a few hours to a few days, depending on some aspects of the project. Aside from building the seat itself, if they have to remove any cabinets, shelves, or baseboards, that will add time to the project.

Bump-out additions can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you’re just looking to increase the space a little—not renovate the entire closet space.

The Ardmore, OK homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.