Get matched with top drywall pros in Streetsboro, OH

The two most common drywall thicknesses for ceilings are 1/2-inch and 5/8-inch. For most standard residential applications, 1/2-inch drywall is sufficient and widely used. It provides adequate support and is lighter and easier to handle during installation compared to thicker sheets. However, 5/8-inch drywall is often used for specific cases where additional benefits are needed. It is heavier but provides superior sound dampening and fire resistance. You should consider using 5/8-inch drywall for ceilings in commercial buildings, between a garage and a living space, or above a finished basement to meet building codes or for enhanced soundproofing.

Knowing what causes drywall damage can help stop it before it starts. Here are some of the most common causes of drywall damage: 

• Water damage from roof leaks or leaky pipes. 

• Small holes caused by doorknobs, minor accidents, and rodent infestations. 

• Wall dents stemming from moving furniture and minor accidents. 

• Wall cracks that form from a settling foundation or seismic activity. 

• Nail pops from nails and screws in the walls. 

• Large holes that are caused by accidents with heavy objects, children and pets, or sporting equipment.

Whether you need a drywall anchor depends on the specifics of your project, particularly what you're hanging and where. You do not need a drywall anchor if you can screw or nail the object directly into a wooden stud, as the wood provides sufficient support and stability. However, if there are no studs in the location where you plan to hang the item, you should use drywall anchors to ensure it is securely supported. For very lightweight objects, like small pictures, adhesive picture hanging strips can be a suitable alternative to anchors.

Most handy homeowners can tackle removing texture from unpainted walls. Removing texture from painted walls is a bit trickier. Paint acts as a sealant, so you can’t soften the texture with water. Instead, you’ll have to add a layer of drywall compound known as a skim coat. This process is messy and takes some practice.